We Match Out-the-Door Pricing Learn more

Free Shipping on most orders over $100

Diptyque DP170-EVO Loudspeakers; pair

Built to order
Regular price $49,999.00
Free Personal Delivery & Setup in the Continental US. Learn More
Color

Family-Owned Authorized Dealer

We're an authorized dealer for every brand listed on this site, so your warranty is valid and fully supported. We're a real brick-and-mortar shop in Chestertown, MD with shelves of actual inventory, not a drop-shipper. Family-owned and run for three generations, since 1978.

Need advice? Want a price match?

Talk to Mike

Third-generation owner

Call or text: 410-239-2020

Yes, that's literally his cell

Diptyque Custom Build Time

All Diptyque speakers including custom colors are MADE TO ORDER. Due to the brand’s popularity and the handcrafted nature of each unit, extended lead times are possible:

  • Please contact us directly for the most accurate lead time and availability.
  • If we don’t hear from you, we’ll follow up with details after your order is placed.

Color Options

Custom Colors

Diptyque offers custom RAL colors for all models.

Note lead times vary, and all are built custom to order.

Click here for a full list of the custom color options available.

Leather Trim Options

For models with leather-wrapped trim sections (DP140MKII, DP160MKII & Reference), choose from four refined color options:

  • White
  • Caramel
  • Chocolate
  • Black

The Diptyque DP170-EVO sits at the top of Diptyque's standard range of French planar-magnetic loudspeakers, a full three-way panel positioned just below the cost-no-object Reference. It pairs two push-pull bipolar bass and midrange cells, with 3,510 square centimeters of radiating area, with a 90-centimeter isodynamic ribbon for the midrange and treble. From a panel just 400 mm deep it reaches from 28 Hz to 40 kHz.

Key Features of the Diptyque DP170-EVO

  • True three-way planar-magnetic panel, where most of the range is two-way
  • Two PPBM (push-pull bipolar) bass and midrange cells with 3,510 cm² of radiating area
  • 90 cm isodynamic ribbon with neodymium magnets for the midrange and treble
  • 28 Hz to 40 kHz frequency response
  • Reference-derived "sandwich" cabinet for rigidity and resonance control
  • 88 dB sensitivity, 6 ohm impedance
  • Hand-built in Montauban, France
  • Black, white, premium leather, or 160 custom RAL finishes

Top of the Standard Range

The DP170-EVO represents over twenty-five years of Diptyque research and innovation, and the company positions it as the top of its standard line. It borrows the mechanical sandwich cabinet structure of the flagship Reference, bringing much of that statement loudspeaker's rigidity and quiet to a more practical floorstanding panel. Only the cost-no-object Reference sits above it.

A True Three-Way Planar

Where most planar loudspeakers split the range in two, the DP170-EVO is a genuine three-way. Two push-pull bipolar (PPBM) cells handle the bass and midrange across 3,510 square centimeters of radiating area, holding the diaphragm between matched magnetic fields on both sides for control and low-frequency authority. A dedicated 90-centimeter isodynamic ribbon, driven by neodymium magnets, carries the midrange and treble out to 40 kHz, for the speed and air that ribbon drivers are prized for.

The Sandwich Cabinet

Diptyque builds the DP170-EVO around the same sandwich mechanical structure developed for the Reference. The layered, bonded construction stiffens the frame and damps resonance, so the energy you hear comes from the planar diaphragms rather than the cabinet around them.

Finishes

The DP170-EVO is offered in standard sandblasted Black 2100 and White 9010, in a premium leather wrap in white, caramel, chocolate, or black, and in any of 160 custom RAL colors to match a room.

Diptyque DP170-EVO panel in a custom navy RAL finish, showing the fine-texture matte surface

If you would like your DP170-EVO in a custom colour, contact us directly. We will walk you through the available RAL options, explain the finish characteristics, and help you match the speakers to your room.

Note: custom finishes may add lead time and incur an additional charge depending on the selection.

Click here for a full list of the custom color options available.

Leather Trim Options

For models with leather-wrapped trim sections, choose from four refined color options:

White Leather Trim
White
Caramel Leather Trim
Caramel
Chocolate Leather Trim
Chocolate
Black Leather Trim
Black

What Does the EVO Acoustic Bass Regulator Do?

The EVO series adds acoustic bass regulation: a series of calibrated perforations on the rear face of the panels that act as progressive dampers on the Mylar membrane at its resonant frequency. The result is a more linear response in the low frequencies and measurably less distortion at high volume.

It came out of a 2025 collaboration with the ONERA acoustic aerospace laboratory in Toulouse, using their anechoic chamber and laser vibrometers to measure how the diaphragms behave. The answer is mechanical, not electronic, so nothing in the signal path changes.

How PPBM Controls the Diaphragm

PPBM, or Push Pull Bipolar Magnet, is Diptyque’s patented driver architecture. Custom large-section bipolar magnets sit at both the front and the rear of the diaphragm, holding the aluminium ribbon voice coil in a constant magnetic field. The diaphragm is controlled from both sides rather than pulled from one.

That control is what gives the bass its shape and lets transients start and stop cleanly. The midrange and treble come from a separate 90 cm isodynamic ribbon assembly built the same way, Mylar film with aluminium winding moving in an intense neodymium field, and joined to the bass cells through a simple 12 dB per octave filter so the registers blend without a complicated crossover in the way.

The twin 90 cm isodynamic ribbon assembly on the Diptyque DP170-EVO, driven by neodymium magnets

Why an Isodynamic Panel Sounds Different

An isodynamic panel radiates over a large surface as a plane wave, so the sound arrives without the projected, point-source quality of a conventional box. It works as a dipole, radiating from both faces, which is what builds the sense of space around the performers.

Front face of the Diptyque DP170-EVO showing the isodynamic bass panel openings alongside the twin ribbon assembly

The same extremely thin Mylar membrane carries everything from bass to treble, so the whole spectrum behaves with one dynamic character. There is no driver firing into a cabinet behind the panel, so there is no box coloration to hear through. The impedance stays regular, which makes the DP170-EVO an undemanding load. And with no high-voltage circuit, the panels are untroubled by dust or humidity over time.

How the Panel Is Built

The structure is modular: an MDF frame, an ultra-rigid HPL composite diaphragm chassis, and 2 mm steel sheets drawn tightly together with a large number of mechanical screws. The assembly is rigid and non-resonant, which is what keeps coloration out and the tonal balance honest.

Edge detail of the Diptyque DP170-EVO showing the layered sandwich panel structure

It also comes apart. The same construction that makes the panel rigid lets the speakers be disassembled for diaphragm replacement, which few loudspeakers at any price allow.

Where the DP170-EVO Sits in the Diptyque Range

The standard planar line, and what each step up adds mechanically.

$29,999
A two-way panel: one isodynamic ribbon handling everything above the 1,600 Hz crossover, PPBM bass cells below it. 50 kg.
Diptyque DP170-EVO You're viewing
$49,999
Adds a third way. A dedicated 90 cm ribbon assembly carries midrange and treble together from 900 Hz up, so the bass cells are no longer asked to reach into the vocal band. Two 3,510 cm² PPBM cells, 55 kg.
$60,000
Adds Crossed Push Pull, the C-PPBM drive Diptyque builds only for the Reference: each bass driver runs two independent coils, one vertical and one horizontal, across a 22 micron Mylar diaphragm.

The Listening Room Difference

We don't just sell high-end audio, we provide a level of service that's as refined as the products we offer. When you invest in loudspeakers like the Diptyque DP170-EVO, you deserve more than a box on your doorstep. You deserve a partner who understands the art of sound and is committed to helping you experience it at its absolute best.

Owner Michael Hoatson will personally deliver the DP170-EVO to your home, anywhere in the country. Not a curbside drop-off. Painstaking setup, room placement, and full system integration, from a third-generation audio family with decades of experience. That is how we bring a system to life.

Diptyque DP170-EVO Specifications

Type Three-way planar-magnetic floorstanding loudspeaker
Bass / midrange Two PPBM cells, 3,510 cm² radiating area
Midrange / treble 90 cm isodynamic ribbon, neodymium magnets
Crossover band 900 Hz to 7,000 Hz
Frequency response 28 Hz to 40 kHz
Sensitivity 88 dB / 1 W / 1 m
Impedance 6 ohms
Power handling 200 W (minimum 60 W)
Dimensions 1,700 × 580 × 400 mm (H × W × D)
Weight 55 kg each
Cabinet Sandwich mechanical structure (Reference-derived)
Finishes Black 2100, White 9010, premium leather, or 160 custom RAL colors
Made in Montauban, France