We Match Out-the-Door Pricing Learn more

Free Shipping on most orders over $100

Opera Mezza V2 Bookshelf Speakers; pair

In stock
Regular price $2,899.00
Finish

Add-On & Save

Opera SP1 Speaker Stand; pair
$584.00 $649.00Save $65

Need advice? Want a price match?

Talk to Mike

Third-generation owner

Call or text: 410-239-2020

Yes, that's literally his cell

Availability

In-stock and ready for same-day pickup. Online orders typically ship within 24 hours. Pallet shipments take a couple of days to coordinate.

See our Terms & Conditions for details.

Family-Owned Authorized Dealer

We're an authorized dealer for every brand listed on this site, so your warranty is valid and fully supported. We're a real brick-and-mortar shop in Chestertown, MD with shelves of actual inventory, not a drop-shipper. Family-owned and run for three generations, since 1978.

Delivery and Shipping

Free shipping for most items over $100! Local delivery up to 500 miles more with minimum qualifying purchase.

See our shipping policies for details. We will contact you after your order.

Limited Availability: We have limited Rosewood units in stock. Concrete Gray special order from Italy.

The Opera Mezza V2 delivers refined two-way sound from a compact bookshelf cabinet, reaching down to 55Hz with 88dB sensitivity. Built around a 6-inch aluminum-cone woofer designed with Scan-Speak and a 26mm soft dome tweeter, the Mezza V2 uses a 4cm-thick MDF cabinet wrapped in modern eco-leather finishes.

Opera has crafted speakers in Treviso, Italy since 1989, and the Classica line, Opera's all-time best-selling series since 2014, has been completely reimagined for V2. The Mezza V2 exemplifies Opera's philosophy of building speakers like fine Italian furniture, where every cabinet is carefully assembled and finished by hand. We carry Opera because they deliver genuine craftsmanship and European engineering at prices that make high-end audio accessible.

Key Features of the Opera Mezza V2

  • 6" Scan-Speak Aluminum Cone Woofer: High-excursion driver developed in collaboration with Danish specialists delivers controlled bass and exceptional midrange clarity with ferrite magnet motor structure.
  • 26mm Soft Dome Tweeter: Extends to 28kHz, built on a standard Scan-Speak design with a significantly reinforced motor structure for better handling in the midrange.
  • 2,200Hz In-House Crossover: A relatively simple network, designed in-house with top-quality components and tuned for the phase alignment of each driver.
  • 4cm Thick MDF Cabinet: Massive panel thickness eliminates resonances and provides the rigid foundation required for accurate driver performance.
  • Rear Bass Reflex Port: A small reflex port on the rear, so Opera recommends at least 20 cm from the wall behind.
  • Italian Eco-Leather Finish: Modern wrap covering front, top, and rear panels provides durability and distinctive aesthetics in Rosewood or Concrete Gray.
  • 88dB Sensitivity: Opera recommends 25 to 100 watts, and the speaker handles 100W without clipping.

Cabinet Construction and Engineering

Opera used a 4-centimeter-thick front panel and chose the cabinet's proportions carefully to reduce internal reflections. The cabinet, entirely crafted from 4cm-thick MDF, is engineered to eliminate unwanted resonances with the help of compression chambers and internal reinforcements, and its front, top and rear panels are wrapped in eco-leather.

Opera Mezza V2 bookshelf speakers in Rosewood, showing the eco-leather-wrapped front panel, wood-effect sides, and soft dome tweeter above the woofer

Driver Technology

The 6-inch woofer represents close collaboration between Opera and Scan-Speak of Denmark. The black anodized aluminum cone delivers the rigidity needed for controlled bass reproduction while maintaining the low mass required for quick transient response. The 26mm soft dome tweeter is based on a standard Scan-Speak model with a significantly reinforced motor structure for better frequency handling, especially in the midrange.

Macro view of the Opera Mezza V2 6-inch Scan-Speak black anodized aluminum cone woofer with its central phase plug, set in the eco-leather baffle

Crossover Design

The Mezza V2 uses a relatively simple two-way crossover at 2,200Hz, designed in-house with top-quality components. Opera developed it with careful attention to the acoustic response of each filter section and the phase alignment of each driver, optimized on and off axis.

Rear-Firing Bass Reflex Port

A single rear-firing bass reflex port loads the 6-inch woofer, extending low-frequency output down to 55Hz from an enclosure of roughly eight liters. The rear panel also carries a single pair of quality binding posts and the Opera badge confirming the speaker's 6-ohm nominal load and Italian assembly.

Rear panel of the Opera Mezza V2 showing the bass reflex port, single pair of binding posts, and the Opera Loudspeakers Mezza V2 badge marking its handcrafted Italian build

Italian Craftsmanship from Opera Loudspeakers

Opera Loudspeakers has crafted speakers in Treviso, Italy since 1989. Classica, Opera's all-time best-selling series since 2014, was completely reimagined for V2, with new finishes and a midwoofer designed in collaboration with Scan-Speak. Every cabinet is carefully assembled and finished by hand, reflecting Opera's commitment to quality at every price point. The eco-leather wrap is applied with precision to create furniture-grade aesthetics, offered in a Rosewood wood-effect finish or a contemporary Concrete Gray.

Opera Mezza V2 shown in both finishes, Rosewood wood-effect on the left and Concrete Gray on the right, each with the eco-leather-wrapped front panel

More in the Opera Classica Series

The Mezza V2 is the compact standmount in Opera's Classica line, the smallest of the family. Looking for more output or a floorstanding design?

  • Opera Prima V2: The larger standmount in the line, with a 7-inch (180mm) woofer that reaches 50Hz.
  • Opera Grand Mezza V2: The slim floorstanding step up, with dual woofers and deeper bass.
  • Opera Quinta V2: The larger three-way Classica floorstander, with dual 7-inch woofers and a dedicated midrange.
  • Opera SP1 Speaker Stand: The matching stand, built to set the Mezza V2 at the correct listening height.

The Listening Room Difference

We're a third-generation family business with a brick-and-mortar showroom in Chestertown, Maryland, and a reputation built on exceptional service and relentless passion for hifi. Whether you're visiting in person or ordering online, we bring decades of experience, personalized service, and honest guidance to every interaction. We don't just ship boxes. We help build systems, answer your questions like real humans, and make sure every detail of your setup is right, from the cables to the final connection. Our passion is helping you get the most out of your gear, with support that lasts well beyond the sale.

Opera Mezza V2 Specifications

Type 2-way bass-reflex bookshelf/standmount speaker
Woofer 6" (150mm) Scan-Speak aluminum cone, ferrite magnet, bass reflex
Tweeter 1" (26mm) soft dome
Frequency Response 55Hz - 28,000Hz
Sensitivity 88 dB (2.83V/1m)
Nominal Impedance 6 Ohms
Crossover Frequency 2,200Hz
Maximum Power 100W (without clipping)
Cabinet Material 4cm thick MDF with internal reinforcements
Finish Eco-leather wrap: Rosewood or Concrete Gray
Country of Origin Italy