Cyrus TTP Turntable

The Cyrus TTP Turntable is a belt-drive turntable built around solid aluminum: a plinth machined from a single aluminum billet, an aluminum platter on a hardened steel axle, and a DC synchronous motor under digital control for very low wow and flutter. It plays 33 1/3 and 45 RPM and comes with its own lightweight tonearm but no fitted cartridge, so the cartridge on it is your choice.

Key Features of the Cyrus TTP Turntable

• Single-Billet Aluminum Plinth: The plinth is machined from one solid block of aluminum, with the main bearing mounted straight into it
• Aluminum Platter on a Hardened Steel Axle: The platter rides on an ultra-precise bearing with integrated lubrication, pre-lubricated at the factory
• DC Synchronous Motor with Digital Control: A custom-designed digital control circuit holds speed steady for very low wow and flutter
• Self-Aligning Belt: The belt fits around the platter and into the motor pulley groove, and self-aligns after a few turns of the platter by hand
• Push-Button 33 1/3 and 45 RPM: A standby key with indicator and separate 33 and 45 selectors on the front panel, and the platter reaches speed within a few seconds
• Lightweight Tonearm: Mass is redistributed along the arm for fewer points of resonance, on almost friction-free horizontal and vertical bearings
• Your Choice of Cartridge: Supplied without a fitted cartridge, ready for a moving magnet or moving coil design and a phono stage set to match
• PSX-R2 Upgrade Port: A dedicated rear port accepts the optional Cyrus PSX-R2 power supply, routed internally to the motor drive stage
• Adjustable Feet: The feet are adjustable and replaceable

A Plinth Machined From One Block of Aluminum

The TTP's plinth and platter are both precision machined from solid aluminum, and the plinth itself comes from a single aluminum billet. The solid, damped aluminum chassis makes the plinth and platter extremely stable for vinyl playback.

Platter and Main Bearing

The aluminum platter is suspended on a hardened steel axle that turns in an ultra-precise bearing with integrated lubrication, mounted into the solid aluminum plinth. The bearing is pre-lubricated at the factory, so no user lubrication should be required, and Cyrus includes replacement bearing oil. In the box you also get the platter mat, the belt, a cartridge alignment template, the power supply and power cables for the US, UK and Europe.

DC Synchronous Motor and Digital Speed Control

The TTP is a belt-drive turntable with an integrated DC synchronous motor, run from a custom-designed digital control circuit for exceptional speed stability and extremely low wow and flutter. Speed is electronic: the standby key on the front panel brings the turntable out of standby, then the 33 or 45 key selects the speed, and the platter reaches it within a few seconds. Separate 33 RPM and 45 RPM speed adjustments sit on the rear panel, alongside a ground terminal. The belt fits around the platter and into the motor pulley groove, and it self-aligns after a few turns of the platter by hand.

The Cyrus Tonearm

Cyrus designed the TTP's tonearm around an intelligent redistribution of mass, so it exhibits fewer points of resonance, and its horizontal and vertical bearing assemblies move almost without friction to gather more information from the groove. Tracking force is set on a dial marked 0 to 3, anti-skating (bias) is set on a slider, and a cueing device lifts and lowers the arm onto the record.

Does the Cyrus TTP Come With a Cartridge?

No. The TTP ships without a fitted cartridge, so you and your dealer choose the cartridge that suits your preference. Cyrus supplies a cartridge alignment template to help with fitting, and the arm can carry a moving magnet or moving coil cartridge, with your phono stage set to the matching MM or MC input. The left and right phono cables connect to the phono input of your amplifier or phono preamplifier, using the MM or MC input to suit your cartridge.

PSX-R2 Power Supply Upgrade

The TTP runs from its supplied power supply, and a separate port on the back accepts the optional Cyrus PSX-R2 as an upgrade. Power from the PSX-R2 is routed internally to the motor drive stage, giving the motor an even more stable, ultra-low noise supply. The turntable detects the PSX-R automatically, so no internal adjustments are required.

Will the Cyrus TTP Run on US Power?

Yes. The supplied power supply accepts 90-264V AC at 50/60Hz, so it runs on standard US 120V power with no converter. It draws under 0.5W in standby and 20W at most.

More from Cyrus

The TTP is Cyrus's first turntable. The rest of the Cyrus range we carry is electronics: the Cyrus 40 PPA phono preamplifier, the Cyrus 40 Amp integrated amplifier and the Cyrus 80 AMP streaming integrated amplifier, or browse the full Cyrus collection.

THE LISTENING ROOM DIFFERENCE

We're a third-generation family business with a brick-and-mortar showroom in Chestertown, Maryland, and a reputation built on exceptional service and relentless passion for hifi. Whether you're visiting in person or ordering online, we bring decades of experience, personalized service, and honest guidance to every interaction. We don't just ship boxes. We help build systems, answer your questions like real humans, and make sure every detail of your setup is right, from the cables to the final connection. Our passion is helping you get the most out of your gear, with support that lasts well beyond the sale.

Cyrus TTP Turntable Specifications