AVM PAS 30.3 Streaming Preamplifier
Need advice? Want a price match?
Talk to Mike
Third-generation owner
Call or text: 410-239-2020Yes, that's literally his cell
Availability
Availability
See our Terms & Conditions for details.
Family-Owned Authorized Dealer
Family-Owned Authorized Dealer
We're an authorized dealer for every brand listed on this site, so your warranty is valid and fully supported. We're a real brick-and-mortar shop in Chestertown, MD with shelves of actual inventory, not a drop-shipper. Family-owned and run for three generations, since 1978.
Delivery and Shipping
Delivery and Shipping
Free shipping for most items over $100! Local delivery up to 500 miles more with minimum qualifying purchase.
See our shipping policies for details. We will contact you after your order.
The AVM PAS 30.3 is the streaming preamplifier of AVM's 30.3 series. It streams, takes a turntable through its MM/MC phono input and plays your TV over HDMI ARC, then sends all of it to the power amplifier you choose. AVM's MA 30.3 MK2 mono amplifiers belong to the same 30.3 series.
Inside its solid aluminum case, AVM describes the circuit as fully balanced, with completely symmetrical signal paths. The analog connections on the rear panel are RCA.
Key Features of the AVM PAS 30.3
- Analog Preamp With Streaming: AVM's X-STREAM Engine and an analog preamplifier in one 430 mm wide case.
- ESS 9038 Q2M DAC: Plays PCM up to 32-bit/384 kHz and DSD256.
- Streaming Services: AirPlay 2, Spotify Connect, Roon Ready, TIDAL Connect MAX, Qobuz, UPnP and web radio, plus Bluetooth 5.0.
- MM and MC Phono Input: 40 dB of gain for moving-magnet cartridges and 60 dB for moving-coil, with plug-in loading for MC.
- HDMI ARC: Your TV's sound plays through the PAS 30.3 and your system.
- Preamp and Line Outputs: A regulated RCA preamp output for your power amplifier and an RCA line output.
- Headphone Output: A 6.3 mm jack on the front panel.
- App and Remote Control: AVM's RC X app for iOS and Android, with a remote included.
Built to Drive Your Power Amplifier
The regulated RCA preamp output drives your power amplifier, with an output impedance of 470 ohms and up to 3 V of output at 1% distortion. AVM rates the preamp section's distortion below 0.001%, its signal-to-noise ratio above 100 dB and its -3 dB frequency response from below 5 Hz to above 80 kHz.
A separate RCA line output, with a 47 ohm output impedance, feeds a recorder.

ESS 9038 Q2M DAC and the X-STREAM Engine
AVM redesigned the digital section of the PAS 30.3 around a next-generation ESS converter, the 9038 Q2M. It plays PCM up to 32-bit/384 kHz and DSD256, and AVM's signal processing upsamples to 192 kHz/24-bit.
Streaming runs on the X-STREAM Engine, AVM's in-house software that updates online. It covers AirPlay 2, Spotify Connect, Roon Ready, TIDAL Connect MAX, Qobuz, UPnP and web radio, with AVM's multiroom and party sync modes. The PAS 30.3 connects by LAN or dual-band Wi-Fi (2.4 and 5 GHz) and also has Bluetooth 5.0. The rear USB port reads hard drives and USB sticks formatted FAT16, FAT32 or NTFS.
Digital Inputs and HDMI ARC
The coaxial digital input accepts up to 192 kHz/24-bit and the optical input up to 96 kHz/24-bit. The HDMI ARC input accepts up to 192 kHz/24-bit and carries stereo audio only, so set your TV to output PCM rather than Dolby or DTS. The coaxial and optical digital outputs can be switched to volume-controlled.
Phono Input for MM and MC Cartridges
The phono input suits moving-magnet cartridges and loud to medium-loud moving-coil cartridges. Moving-magnet gain is 40 dB, with the load fixed internally at 47k ohms. Moving-coil gain is 60 dB.
For moving-coil loading, AVM includes pairs of RCA plugs at 100, 200 and 1,000 ohms that go into the LOAD input. When your cartridge maker gives no value, AVM suggests the 100 ohm plug. AVM rates RIAA accuracy within 0.2 dB and the signal-to-noise ratio above 83 dB(A) for MM and above 74 dB(A) for MC.
Tone Controls, Inputs and Display
Bass and treble each adjust from -6 to +6 dB, with a loudness setting, and the LINEAR setting switches the tone controls off. Bass and treble can apply to all inputs or only to the selected one, so you can lift the bass on a turntable without touching your other sources.
The PAS 30.3 has two RCA line inputs, and AVM's source-fix function runs RCA 1 and RCA 2 at a fixed gain for a home theater processor, which then sets the volume. The OLED display is dimmable and has a proximity sensor.
Silver, Black or Cellini Chrome
The PAS 30.3 comes in silver or black, or as the Cellini version with a chrome-plated, hand-polished front. AVM builds it by hand at its factory in Malsch, Germany, and each unit gets a break-in period of several days.

Who Is AVM?
AVM Audio Video Manufaktur has built hi-fi by hand in Germany since 1986, and its products are sold in more than 50 countries. The AVM 30.3 series is the entry point to AVM, below the Inspiration, Evolution and Ovation S lines.
Where the PAS 30.3 fits in the AVM preamplifier line
How the PAS 30.3 compares to AVM's other streaming preamplifiers, and what each step up the line adds.
All three stream through AVM's X-STREAM Engine and take a turntable on an MM/MC phono input. The Evolution PAS 3.3 and PAS 5.3 add XLR inputs and a motor-driven volume control, and the PAS 5.3 adds a tube line stage. Browse the full AVM range.
The Listening Room Difference
We're a third-generation family business with a brick-and-mortar showroom in Chestertown, Maryland, and a reputation built on exceptional service and relentless passion for hifi. Whether you're visiting in person or ordering online, we bring decades of experience, personalized service, and honest guidance to every interaction. We don't just ship boxes. We help build systems, answer your questions like real humans, and make sure every detail of your setup is right, from the cables to the final connection. Our passion is helping you get the most out of your gear, with support that lasts well beyond the sale.
AVM PAS 30.3 Specifications
| Type | Streaming preamplifier |
| Preamplifier Distortion | Below 0.001% |
| Preamplifier Signal-to-Noise | Above 100 dB |
| Frequency Response (-3 dB) | Below 5 Hz to above 80 kHz |
| Crosstalk | Above 95 dB (channels), above 85 dB (inputs) |
| Input Impedance | 3.4 kohms |
| Output Impedance | 470 ohms (pre out), 47 ohms (line out), 80 ohms (headphones) |
| Maximum Output Level (1% THD) | 3 V (pre out), 3.5 V (line out) |
| DAC | ESS 9038 Q2M |
| Maximum Sampling Rates | DSD256, 32-bit/384 kHz PCM |
| Streaming | AirPlay, Qobuz, Roon Ready, Spotify, TIDAL Connect MAX, HighResAudio |
| File Formats | WAV, MP3, WM, AAC, FLAC, ALAC, DSD, Ogg, AIFF |
| Network | LAN (100 Mbit/s), Wi-Fi 2.4/5 GHz (802.11a/b/g/n/ac), 2 antennas |
| Bluetooth | 5.0 LE |
| Digital Inputs | Coaxial (192 kHz/24-bit), optical (96 kHz/24-bit), HDMI ARC (192 kHz/24-bit), USB 2.0 for drives |
| Digital Outputs | Coaxial (192 kHz/24-bit), optical (96 kHz/24-bit) |
| Analog Inputs | 2 RCA line, phono (MM/MC) |
| Analog Outputs | RCA pre out (regulated), RCA line out |
| Phono Gain | MM 40 dB, MC 60 dB |
| MC Loading | 100, 200 or 1,000 ohms (included plugs) |
| RIAA Accuracy | Within 0.2 dB |
| Power Consumption | Below 0.5 W standby, below 2 W network standby, below 16 W idle |
| Dimensions (W x H x D) | 430 x 115 x 320 mm (16.9 x 4.5 x 12.6 in) |
| Weight | 6.7 kg (14.8 lb) |
| Finishes | Silver, Black, Cellini chrome |
What is the difference between the AVM PAS 30.3 and the AS 30.3?
What is the difference between the AVM PAS 30.3 and the AS 30.3?
The power amplifier. The AS 30.3 has one built in, with speaker outputs. The PAS 30.3 has no speaker outputs; it sends a preamp-level signal from its RCA preamp output to a separate power amplifier. Both stream through AVM's X-STREAM Engine and have an MM/MC phono input and HDMI ARC.
Which power amplifiers work with the AVM PAS 30.3?
Which power amplifiers work with the AVM PAS 30.3?
A power amplifier with RCA inputs connects to the PAS 30.3's regulated RCA preamp output, which has a 470 ohm output impedance. In AVM's own 30.3 series, the MA 30.3 MK2 mono amplifiers have RCA and XLR inputs.
Can I connect my TV to the AVM PAS 30.3?
Can I connect my TV to the AVM PAS 30.3?
Yes, through the HDMI ARC input, which accepts up to 192 kHz/24-bit. It carries stereo audio only, so set your TV's audio output to PCM rather than Dolby or DTS. The HDMI port does not pass video.
Will the PAS 30.3 phono input work with a moving-coil cartridge?
Will the PAS 30.3 phono input work with a moving-coil cartridge?
Yes, with moving-magnet cartridges and loud to medium-loud moving-coil cartridges. Moving-coil gain is 60 dB, and you set the load with the included RCA plugs at 100, 200 or 1,000 ohms.
Can the AVM PAS 30.3 work with a home theater processor?
Can the AVM PAS 30.3 work with a home theater processor?
Yes. AVM's source-fix function runs the RCA 1 and RCA 2 inputs at a fixed gain and switches off the tone controls on that input, so the home theater processor sets the volume.











