{"title":"Best Phono Cartridges $1,000 - $2,000","description":"\u003cp\u003ePhono cartridges from $1,000 to $2,000 are hand-built transducers where assembly precision directly determines sonic performance. Moving coil generators use fewer, finer wire turns for lower mass and faster response. Stylus profiles move to line-contact and microridge geometries that sit deeper in the groove and read modulations that rounder styli can't reach. At this price, the cartridge isn't the bottleneck in a well-set-up turntable system anymore. It becomes the component that defines the system's character. That's a meaningful shift.\u003c\/p\u003e","products":[{"product_id":"goldring-ethos-se-moving-coil-cartridge","title":"Goldring Ethos SE Moving Coil Cartridge","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Goldring Ethos SE Moving Coil Cartridge is a special edition of the acclaimed Ethos model, positioned at the top of Goldring's moving coil range. Combining advanced engineering with exclusive features, the Ethos SE delivers precise sound reproduction, making it an excellent choice for audiophiles seeking enhanced detail and clarity for a wide range of turntables.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003ePure Silver Coils: Fewer windings with higher conductivity reduce tip mass and internal impedance for improved tracking and transient response.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eLow-Mass Cross-Armature Core: Made from Swedish iron, enhancing channel separation and producing a realistic soundstage.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eLine-Contact Diamond Stylus: Features a polyhedral, line-contact diamond stylus with a 6 µm radius for enhanced high-frequency response and minimized distortion.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eLow-Reluctance Pole Shoes: Ensure smooth and extended frequency response through an exclusive manufacturing process.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eAircraft-Grade Aluminum Body: Low-resonance, anodized aluminum offers superior rigidity and durability.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eDesign and Build\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Ethos SE is housed in an aircraft-grade aluminum body, selected for its low density and high resistance to fatigue. This robust construction minimizes unwanted vibrations, ensuring stable performance. The pure silver coils feature fewer windings and higher conductivity, reducing tip mass and internal impedance. Additionally, the low-mass cross-armature core made from Swedish iron enhances channel separation, contributing to a more expansive and accurate soundstage.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003ePerformance\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEquipped with a line-contact diamond stylus, the Ethos SE excels in tracing fine groove details with precision. The narrow, low tip-mass design ensures superior high-frequency detail retrieval while minimizing distortion. The pure silver coils and low-reluctance pole shoes work together to deliver a smooth and extended frequency response, particularly excelling in the upper registers. This combination results in a detailed and immersive listening experience, comparable to higher-priced moving coil cartridges.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eVersatility and Compatibility\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Goldring Ethos SE is compatible with a wide range of budget to midrange turntables, thanks to its standard mounting specifications and straightforward installation process. Designed to work seamlessly with standard moving coil phono inputs of integrated amplifiers, the Ethos SE offers high output and flexibility for various audio setups. Whether upgrading an existing cartridge or enhancing an obsolete system, the Ethos SE provides a versatile solution for achieving exceptional vinyl playback.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eThe Listening Room Experience\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt The Listening Room, we take pride in offering more than just high-fidelity audio equipment. We provide expert advice, personalized service, and a commitment to helping you find the perfect sound system for your space. From delivery to custom setup, our goal is to ensure that every piece of equipment you purchase performs at its absolute best in your environment. Trust us to be your partners in the pursuit of exceptional sound.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 Hz – 20 kHz ±2 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtended Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 Hz – 32 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Balance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWithin 1 dB at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Separation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreater than 30 dB at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 mV ±1 dB at 1 kHz @ 5 cm\/sec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStatic Compliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e28 mm\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTrackability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e90 µm (@ 315 Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEquivalent Tip Mass\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.34 mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVertical Tracking Angle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus Profile\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVital line-contact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus Radius\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e35 x 8 µm (0.3 mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNon-Replaceable (re-tip service available, see website)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad Capacitance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 – 500 pF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal Inductance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.5 µH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.8 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCartridge Mass\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.7 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCartridge Mass (inc. Fixings)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.5 g (without stylus cover)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFixing Centres\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5\" (12.7 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePlaying Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 – 2.0 g (1.7 g recommended)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Goldring","offers":[{"title":"Default Title","offer_id":41311936020576,"sku":"GL0004M","price":1999.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/GoldringEthosSEMovingCoilCartridge-Sideviewofcartridge.jpg?v=1726840844"},{"product_id":"goldring-ethos-moving-coil-cartridge","title":"Goldring Ethos Moving Coil Cartridge","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Goldring Ethos Moving Coil Cartridge is a high-end model that combines meticulous engineering with innovative features to deliver exceptional sound reproduction. Featuring a vital-shank, line-contact diamond stylus, the Ethos ensures precise tracking and detailed audio performance, making it an ideal choice for discerning listeners.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eVital Line-Contact Diamond Stylus: Polyhedral profile with a 6 µm radius for enhanced high-frequency detail and reduced distortion.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eHand-Built GOL-1 Moving-Coil Generator: Cross-shaped, soft-iron armature paired with a low resonance aircraft-grade aluminum chassis for superior performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eAlloy Cantilever: Stiff and lightweight, optimized for stability and accurate groove tracing.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eCross-Shaped Armature: Improves channel separation and minimizes cross-talk, delivering a realistic soundstage.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eOptimized Suspension: Bespoke butyl rubber damper and tensioned tie-wire ensure ultra-stable performance during complex passages.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eNeodymium Magnet: Lightweight and powerful, providing a uniform magnetic field for a flat and extended frequency response.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eAluminum Body Shell: Precision-milled, aircraft-grade aluminum reduces unwanted resonances and maintains low effective mass.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eDesign and Build\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Ethos cartridge features a robust aluminum body shell, precision-milled from aircraft-grade aluminum for low density and high rigidity. This construction minimizes vibrations, ensuring stable performance. The vital-shank, line-contact diamond stylus is mounted on a stiff and lightweight alloy cantilever, optimized for stability and ride height. The hand-built GOL-1 moving-coil generator, featuring a cross-shaped, soft-iron armature, is integrated with the aluminum chassis, ensuring precision tuning and exceptional performance.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003ePerformance\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDesigned to trace the smallest groove details with complete fidelity, the Ethos delivers smooth, extended highs with low distortion. The vital line-contact diamond stylus, combined with the low-mass alloy cantilever, provides excellent trackability and transient response, allowing for accurate reproduction of ultrasonic frequencies. The cross-shaped armature enhances channel separation and produces a highly detailed and dynamic soundstage. Optimized suspension and the neodymium magnet setup ensure a flat and extended frequency response, providing a detailed and immersive listening experience.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eVersatility and Compatibility\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Goldring Ethos is compatible with a wide range of budget to midrange turntables, thanks to its standard mounting specifications and straightforward installation process. Designed to work seamlessly with standard moving coil phono inputs of integrated amplifiers, the Ethos offers high output and flexibility for various audio setups. Whether upgrading an existing cartridge or enhancing a legacy system, the Ethos provides a versatile solution for achieving exceptional vinyl playback. Its expert-adjusted azimuth ensures a proper stereo soundstage without the need for additional adjustments.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eThe Listening Room Experience\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt The Listening Room, we take pride in offering more than just high-fidelity audio equipment. We provide expert advice, personalized service, and a commitment to helping you find the perfect sound system for your space. From delivery to custom setup, our goal is to ensure that every piece of equipment you purchase performs at its absolute best in your environment. Trust us to be your partners in the pursuit of exceptional sound.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus Profile\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVital line-contact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCantilever\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eReplaceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 Hz – 32 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e±2 dB (35 Hz – 20 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Balance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;1 dB at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Separation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;30 dB at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5 mV ±1 dB @ 1 kHz @ 5 cm\/sec (RMS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStatic Compliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25 mm\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDynamic Compliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 mm\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVertical Tracking Angle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus Radius\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e35 x 8 µm (0.3 mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNon-Replaceable (re-tip service available, see website)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad Capacitance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 – 1000 pF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal Inductance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.5 µH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCartridge Mass\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.7 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal Mass (incl. Fixings)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.5 g (without stylus cover)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFixing Centres\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12.7 mm (0.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePlaying Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 – 2.0 g (1.7 g recommended)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplacement Stylus\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1012GX - D12GX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Goldring","offers":[{"title":"Default Title","offer_id":41312101335136,"sku":"GL0003M","price":1599.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/GoldringEthosMovingCoilCartridge-Sideviewofcartridge.jpg?v=1726844906"},{"product_id":"goldring-elite-moving-coil-cartridge","title":"Goldring Elite Moving Coil Cartridge","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Goldring Elite Moving Coil Cartridge is an ultra high-performance, low-output model that integrates Goldring's traditional design elements. Featuring advanced magnetic circuitry with a neodymium magnet and an ultra-rigid Pocan® body, the Elite offers precise groove information retrieval and a smooth, extended frequency response. Its Gyger S line-contact diamond stylus and hand-wound Swedish iron armature with pure silver wire provide enhanced definition compared to standard record cartridges. The Elite embodies Goldring's commitment to traditional British audio technology and design.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eGyger S Stylus Profile: Features a polyhedral, line-contact diamond stylus with a 6 µm radius for precise tracking and enhanced high-frequency detail.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eEfficient Magnetic Circuit: Utilizes a neodymium (NdFeB) magnet, reducing overall mass and improving trackability for a flat and extended frequency response.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eLow-Mass Pocan® Body: Constructed from ultra-rigid, glass-reinforced polyester, keeping the cartridge mass below 6.0 g for improved stability and resonance control.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eExpert Adjustment: Individually adjusted for azimuth and compliance by Goldring’s expert craftsmen, ensuring optimal channel balance and minimal cross-talk.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eHand-Wound Swedish Iron Armature: Enhanced with pure silver wire for higher definition sound reproduction.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eDesign and Build\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Elite cartridge features a robust Pocan® body made from ultra-rigid, glass-reinforced polyester. This construction securely holds all fixed components in place, minimizing unwanted vibrations that can affect sound quality. The precision-milled aircraft-grade aluminum chassis enhances rigidity and reduces resonances, ensuring stable and accurate sound reproduction. The Gyger S line-contact diamond stylus is mounted on a stiff and lightweight alloy cantilever, optimized for stability and precise groove tracing. The hand-wound Swedish iron armature with pure silver wire offers higher definition sound reproduction, enhancing the cartridge's overall performance.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003ePerformance\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEquipped with a Gyger S line-contact diamond stylus, the Elite excels in tracing fine groove details with precision. The narrow, low tip-mass design ensures smooth, extended highs with low distortion and minimized sibilance. The efficient magnetic circuit, featuring a neodymium magnet and low reluctance pole shoes, delivers a flat and extended frequency response, particularly in the upper registers. The cross-shaped Swedish iron armature enhances channel separation and produces a detailed and dynamic soundstage, providing an immersive listening experience.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eVersatility and Compatibility\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Goldring Elite is compatible with a wide range of budget to midrange turntables, thanks to its standard mounting specifications and straightforward installation process. Designed to work seamlessly with standard moving coil phono inputs of integrated amplifiers, the Elite offers low-output flexibility for various audio setups. Whether upgrading an existing cartridge or enhancing an obsolete system, the Elite provides a versatile solution for achieving quality vinyl playback. Its expert-adjusted azimuth ensures a proper stereo soundstage without the need for additional adjustments.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eThe Listening Room Experience\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt The Listening Room, we take pride in offering more than just high-fidelity audio equipment. We provide expert advice, personalized service, and a commitment to helping you find the perfect sound system for your space. From delivery to custom setup, our goal is to ensure that every piece of equipment you purchase performs at its absolute best in your environment. Trust us to be your partners in achieving outstanding sound quality.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus Profile\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGyger S line-contact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCantilever\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNon-Replaceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 Hz – 30 kHz ±2 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 Hz – 32 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Balance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;1 dB at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Separation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;25 dB at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5 mV ±1 dB @ 1 kHz @ 5 cm\/sec (RMS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStatic Compliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18 mm\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEquivalent Tip Mass\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVertical Tracking Angle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus Radius\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGyger S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad Capacitance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 – 500 pF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal Inductance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 µH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCartridge Mass\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.7 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal Mass (incl. Fixings)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.6 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFixing Centre\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12.7 mm (0.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePlaying Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 – 2.0 g (1.7 g recommended)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Goldring","offers":[{"title":"Default Title","offer_id":41312114868320,"sku":"GL0010M","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/GoldringEliteMovingCoilCartridge-Sideviewofcartridge.jpg?v=1726846240"},{"product_id":"michell-cusis-e-h-cartridge","title":"Michell CUSIS E\/H Moving Coil Cartridge","description":"\u003cp\u003eThe Michell CUSIS E\/H takes the celebrated performance of the \u003ca href=\"https:\/\/listenroom.com\/products\/michell-cusis-e-moving-coil-cartridge\"\u003eCUSIS E\u003c\/a\u003e cartridge and adds high-output capability, making it compatible with MM phono stages. Designed as an entry point into Michell’s moving coil range, the CUSIS E\/H delivers an outstanding level of detail, precision, and musicality, allowing you to experience your vinyl with clarity and depth.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Output for MM Phono Stages\u003c\/strong\u003e: Enjoy the refined detail of a moving coil cartridge with the convenience of high output for MM-compatible systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable Magnetic Field\u003c\/strong\u003e: Built around a samarium-cobalt magnet paired with pure iron, creating a stable magnetic field that enhances detail retrieval and musical accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-Wound Coils\u003c\/strong\u003e: 30μ pure copper wire is precisely wound onto an ultra-light armature, supported by a specially designed damper to ensure precise groove tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-Vibration Chassis\u003c\/strong\u003e: The aluminum chassis absorbs unwanted vibrations, providing a rigid platform for the cartridge components and ensuring clean, uncolored sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration-Resistant Design\u003c\/strong\u003e: Thoughtful construction of the body materials, shapes, and exterior patterns further eliminates resonance, offering a neutral and transparent audio experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eUncompromised Detail and Musicality\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eEvery element of the CUSIS E\/H cartridge is engineered to preserve the integrity of the music. With a lightweight armature and precision damping, the stylus tracks grooves with remarkable accuracy, revealing intricate details and dynamic soundscapes. The high-output design bridges the gap between the world of moving coil cartridges and the convenience of MM phono stages, making the CUSIS E\/H an accessible choice for audiophiles seeking top-tier sound.\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eThe Listening Room Experience\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt The Listening Room, we take pride in offering more than just high-fidelity audio equipment. We provide expert advice, personalized service, and a commitment to helping you find the perfect sound system for your space. From delivery to custom setup, our goal is to ensure that every piece of equipment you purchase performs at its absolute best in your environment. Trust us to be your partners in the pursuit of exceptional sound.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTracking Force\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.0g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoading\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e47KΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20-25,000 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.9g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCantilever Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus Profile\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eElliptical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Balance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;1.5dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Separation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8x10⁻⁶cm\/dyne\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTracking Ability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70µ \/ 2.0g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal Impedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e130 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMoving Coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoil Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePure 30µ Copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRun-in Period\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 40 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAcetyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Michell Audio","offers":[{"title":"Default Title","offer_id":41421557497952,"sku":"MACUSISEH","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/MichellEHCusisCartridgeMainImage.jpg?v=1730948810"},{"product_id":"michell-cusis-e-moving-coil-cartridge","title":"Michell CUSIS E Moving Coil Cartridge","description":"\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eThe Michell Audio CUSIS E is your gateway to high-end vinyl playback. Crafted with the same meticulous engineering found across Michell’s CUSIS cartridge range, it delivers great detail and musicality while preserving the essence of every recording.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eSamarium-Cobalt Magnet\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: Creates a stable magnetic field, ensuring accurate and faithful signal reproduction.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eUltra-Light Armature\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: Pure 30μ copper coils wound with precision for enhanced clarity and lower distortion.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eElliptical Stylus \u0026amp; Aluminum Cantilever\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: Tracks grooves effortlessly, offering improved high-frequency performance and reduced inner-groove distortion.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eAcetyl Body\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: Rigid yet lightweight, minimizing vibrations and contributing to a balanced, neutral sound.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eOptimized Output\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: 0.35 mV, suitable for a wide range of MC preamps.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eWhy It Matters\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eYour cartridge is the first point of contact between your turntable and your records. With the CUSIS E, you get a refined moving coil design that highlights musical nuances without sacrificing warmth. From the high-grade materials to the careful coil winding, every element contributes to a natural, dynamic presentation of your favorite albums.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003ePerformance\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eAt 2.0 grams of tracking force, the CUSIS E glides through each record groove, ensuring crisp channel separation (23dB) and a wide frequency range (20–25kHz). Its elliptical stylus maintains accurate tracking across the disc, revealing subtle details and a coherent, lifelike soundstage. Whether you’re into jazz improvisations or rock anthems, this cartridge faithfully captures the artist’s intent.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eTechnology\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eMichell’s moving coil expertise is embodied in the CUSIS E’s samarium-cobalt magnet and specially engineered damper. This design, combined with an aluminum cantilever and precision-wound coils, reduces unwanted resonance and preserves signal integrity. The result is an engaging, distortion-free listening experience that invites you deeper into the music.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eThe Listening Room Experience\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eAt The Listening Room, we believe in starting strong when it comes to vinyl playback. The CUSIS E is a fantastic entry into the world of moving coil cartridges, offering both detail and warmth in equal measure. Whether you’re upgrading from a basic setup or diving headfirst into MC territory, our knowledgeable team (including Mike, who’s always happy to compare your favorite pressings) is here to guide you every step of the way. Let us help you discover how the CUSIS E can open new dimensions in your record collection.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 data-pm-slice=\"1 3 []\"\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTracking Force\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.0 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoading\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20Hz–25kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.9 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCantilever Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus Profile\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eElliptical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Balance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;1 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Separation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e23 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 × 10⁻⁶ cm\/dyne\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTracking Ability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70µ \/ 2.0 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal Impedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMoving Coil (MC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoil Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePure 30µ Copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRun-in Period\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 40 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAcetyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Michell Audio","offers":[{"title":"Default Title","offer_id":41573810307168,"sku":"MACUSISE","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/MichellCusisEMovingCoilCartridge.jpg?v=1738248713"},{"product_id":"rega-ania-pro-moving-coil-cartridge","title":"Rega Ania Pro Moving Coil Cartridge","description":"\u003cp\u003eThe Rega Ania Pro is a high-performance moving coil cartridge that builds upon the success of the original Ania. Designed and hand-built in the UK, the Ania Pro uses an advanced Vital profile nude diamond stylus to extract maximum detail from your vinyl collection. It is engineered to deliver a well-balanced and dynamic performance, providing an articulate and detailed sound with precise imaging and a wide soundstage. The Ania Pro is a testament to Rega's commitment to delivering high-end analog performance at an accessible price point.\u003c\/p\u003e\n\u003ch5\u003eKey Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVital Profile Nude Diamond Stylus:\u003c\/strong\u003e The cartridge is fitted with a high-quality Vital profile nude diamond stylus, which is an advanced elliptical profile that ensures superb tracking and highly detailed retrieval from the record groove.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Powered Neodymium Magnet:\u003c\/strong\u003e The Ania Pro utilizes a super high-powered neodymium magnet system and a hand-wound micro-coil, designed for ultra-low mass, enabling it to respond with incredible speed and accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid PPS Body:\u003c\/strong\u003e The cartridge body is made from a polymer\/40% glass combination (Polyphenylene Sulphide), chosen for its exceptional hardness and dimensional stability, providing a non-resonant platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-Built Craftsmanship:\u003c\/strong\u003e Each cartridge is meticulously assembled by a team of skilled technicians, reflecting a commitment to quality and precision in every component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Mounting System:\u003c\/strong\u003e The 3-point mounting system provides a rigid and secure connection to the tonearm, ensuring optimal performance and simplified setup, especially on Rega tonearms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eAdvanced Stylus and Generator\u003c\/h5\u003e\n\u003cp\u003eThe Ania Pro’s core engineering is focused on a single-minded goal: to extract the finest details from your records. The advanced Vital profile nude diamond stylus works in perfect harmony with the super high-powered neodymium magnet and the hand-wound micro-coil. This miniature assembly is designed to respond with incredible speed and agility, capturing the finest musical details with a transparency that is rare at this price point. The sophisticated design ensures a transparent and highly dynamic sound.\u003c\/p\u003e\n\u003ch5\u003eDesign and Construction\u003c\/h5\u003e\n\u003cp\u003eThe Ania Pro's body is a marvel of modern engineering. It is made from a polymer\/40% glass combination known as Polyphenylene Sulphide (PPS-Fortron), a material chosen for its exceptional hardness and dimensional stability. The complex body shape is created using a high-pressure injection mould tool, a process that took over a year to perfect. This rigid, non-resonant housing provides a perfect platform for the delicate internal components. The cartridge is also fitted with a red, CAD-designed cover to protect the internal fine wires and features Rega’s unique three-point fixing method for a secure and optimal connection to the tonearm.\u003c\/p\u003e\n\u003ch5\u003eA New Level of Performance\u003c\/h5\u003e\n\u003cp\u003eThe Ania Pro offers a significant upgrade in performance over many standard moving coil cartridges. The combination of its advanced stylus, powerful magnet system, and rigid body construction results in a sound that is both musical and revealing. Listeners can expect to hear a tight, controlled bass, a warm and articulate mid-range, and a smooth, accurate top-end. The Ania Pro’s ability to dig deep into the nuances of a recording makes it a compelling choice for serious audiophiles looking to elevate their analog playback system.\u003c\/p\u003e\n\u003ch5\u003eThe Listening Room Difference\u003c\/h5\u003e\n\u003cp\u003eWe’re a third-generation family business with a brick-and-mortar showroom in Chestertown, Maryland, and a reputation built on trust, not hype. Whether you’re visiting in person or ordering online, we bring decades of experience, personalized service, and honest guidance to every interaction. We don’t just ship boxes. We help build systems, answer your questions like real humans, and make sure every detail of your setup is right, from the cables to the final connection. Our passion is helping you get the most out of your gear, with support that lasts well beyond the sale.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTracking Pressure\u003c\/td\u003e\n\u003ctd\u003e1.75 - 2.00 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Load Impedance\u003c\/td\u003e\n\u003ctd\u003e100 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Impedance\u003c\/td\u003e\n\u003ctd\u003e10 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Output Voltage\u003c\/td\u003e\n\u003ctd\u003e350 μV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Balance\u003c\/td\u003e\n\u003ctd\u003e≥ 20 μV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeparation\u003c\/td\u003e\n\u003ctd\u003e≥ -29 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMass\u003c\/td\u003e\n\u003ctd\u003e6 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Rega","offers":[{"title":"Default Title","offer_id":42232160911456,"sku":"REGANIAPRO","price":1225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/module-2-ania-pro-_3.jpg?v=1755717166"},{"product_id":"hana-ml-moving-coil-phono-cartridge","title":"HANA ML Moving Coil Phono Cartridge","description":"\u003cp\u003eThe HANA ML is the low-output (0.4mV) M Series cartridge. It pairs a nude Microline stylus and aluminum cantilever with a Delrin (POM) chassis and the 8-ohm Alnico generator Hana later scaled up for the \u003ca href=\"\/products\/hana-umami-blue-moving-coil-cartridge\"\u003eUmami Blue\u003c\/a\u003e. The Microline tip mimics a mastering lathe cutting head, with a longer narrower contact patch than Shibata for finer detail and longer stylus life. The ML is Hana's cleanest low-output engineering before the Umami line.\u003c\/p\u003e\n\n\u003ch5\u003eKey Features of HANA ML Phono Cartridge\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNude Microline stylus:\u003c\/strong\u003e a profile shaped like a vinyl mastering lathe's cutting head, with a longer and narrower vertical contact patch than Shibata for finer high-frequency detail and longer stylus life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum cantilever:\u003c\/strong\u003e rigid and light, paired with the nude diamond for low effective tip mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlnico magnet, pure-iron magnetic circuitry:\u003c\/strong\u003e the same low-impedance generator architecture used in the Umami Blue. Front yoke and pole pieces are pure iron and cryogenically treated; the magnet is Alnico for stable long-term field strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-output generator wound for MC stages:\u003c\/strong\u003e 0.4mV at 1kHz with an 8-ohm coil impedance, recommended into a load greater than 100 ohms. The lower coil impedance is associated with cleaner generator behavior and broader phono-stage compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelrin (POM) body with brass cap and threaded mounting:\u003c\/strong\u003e denser than the elastomer-coated body on the S MK II, with measurably better resonance damping. Headshell screws thread into metal, not plastic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.5g cartridge mass:\u003c\/strong\u003e heavier than the S MK II, mass-matches mid-mass tonearms cleanly and improves bass authority and dynamic snap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30dB channel separation, 12-45,000Hz frequency response:\u003c\/strong\u003e tighter separation specs than the S MK II Shibata models, wider frequency response at the top end.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eMicroline Stylus and Aluminum Cantilever\u003c\/h5\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/2_b1f2053b-d42b-4336-ba29-0ecb9c238bd6.jpg?v=1778331805\" alt=\"HANA ML cartridge body white background showing aluminum cantilever and Microline stylus\" style=\"width:100%;max-width:1000px;height:auto;border-radius:12px;margin:16px 0;\"\u003e\n\u003cp\u003eThe Microline tip is the most distinguishing change between the M Series and the S Series. Where a Shibata stylus has a hyperelliptical line-contact profile that sits relatively deep in the groove, a Microline has a longer and narrower contact patch shaped much closer to the cutting stylus that originally cut the vinyl master. That closer geometric match means the stylus reads finer high-frequency detail per pass, particularly cymbal decay, sibilance overtones, and inner-groove violin information that a Shibata starts to lose. The longer contact patch also spreads stylus wear over more surface area, which translates to longer stylus life under the same tracking force and record-cleanliness conditions. The cantilever is aluminum, rigid, light, and well-matched to the Microline tip's mass. Hana steps up to a boron cantilever on the Umami Blue, which is the next refinement above the aluminum used here.\u003c\/p\u003e\n\n\u003ch5\u003eThe 8-Ohm Alnico Generator (Same as Umami Blue)\u003c\/h5\u003e\n\u003cp\u003eThe ML's generator is the lower-impedance Alnico cross-coil that Hana later scaled up for the Umami Blue. Coil impedance is 8 ohms, output is 0.4mV at 1kHz, and recommended load is greater than 100 ohms. The lower coil impedance is associated with reduced internal damping in the generator (less self-induced loss as the coil moves through the magnetic field) and broader phono-stage compatibility (the cartridge is less sensitive to the exact load resistance set on the phono stage). Channel separation measures 30dB at 1kHz, slightly tighter than the S MK II's 28dB. Frequency response extends from 12Hz to 45kHz, wider at the top than the S MK II's 32kHz ceiling, which the Microline geometry contributes to.\u003c\/p\u003e\n\n\u003ch5\u003ePure-Iron Yoke, Cryogenic Treatment, and the Alnico Magnet\u003c\/h5\u003e\n\u003cp\u003eThe ML magnetic circuitry uses pure iron yoke and pole pieces (rather than steel alloys), cryogenically treated. Cryogenic treatment is a slow controlled cool-down to roughly minus 300F followed by a slow return to room temperature, which refines grain boundaries in the metal, reduces internal stresses left over from machining, and (in audio applications) is associated with lower noise floor and better signal coherence. Hana applies the treatment to the front yoke and the center and rear magnetic-circuit components. The magnet is Alnico, the same magnet material used in the higher-tier Umami line.\u003c\/p\u003e\n\n\u003ch5\u003eDelrin Body and Brass Mounting Cap\u003c\/h5\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/4_c8b56af1-1482-4811-80c9-f1a63de9751c.jpg?v=1778331807\" alt=\"HANA ML cartridge mounted in headshell with brass mounting cap visible\" style=\"width:100%;max-width:1000px;height:auto;border-radius:12px;margin:16px 0;\"\u003e\n\u003cp\u003eThe ML body is injection-molded Delrin (DuPont's brand name for POM, a high-density acetal polymer). Delrin is denser than the elastomer-coated ABS used on the S MK II and damps body-borne resonance more effectively. The body weighs in heavier at 9.5 grams, which couples more positively to mid-mass tonearms and contributes to bass authority and dynamic snap. The top plate is a brass cap with built-in threaded mounting holes, so the headshell bolts thread into metal rather than into plastic body inserts. Installation is faster and the mechanical coupling between cartridge and headshell is more consistent over time.\u003c\/p\u003e\n\n\u003ch5\u003eTonearm and Phono Stage Matching\u003c\/h5\u003e\n\u003cp\u003eEffective compliance is 10 x 10-6 cm\/dyne at 100Hz, recommended tracking force is 2.0 grams, and cartridge weight is 9.5 grams. That puts the ML in mid-mass tonearm territory. We pair it most often with the \u003ca href=\"\/products\/rega-rb880-tonearm\"\u003eRega RB880\u003c\/a\u003e, the \u003ca href=\"\/products\/michell-t8-tonearm\"\u003eMichell T8\u003c\/a\u003e, the \u003ca href=\"\/products\/oracle-audio-paris-tonearm\"\u003eOracle Paris\u003c\/a\u003e, and the \u003ca href=\"\/products\/oracle-audio-origine-tonearm\"\u003eOracle Origine\u003c\/a\u003e. Buyers building a longer-term reference setup move up to the \u003ca href=\"\/products\/rega-rb3000-tonearm\"\u003eRega RB3000\u003c\/a\u003e ($2,445) or the \u003ca href=\"\/products\/michell-tecnoarm-2-tonearm\"\u003eMichell TecnoArm 2\u003c\/a\u003e ($1,999). On the phono-stage side, the 0.4mV output and 8-ohm coil impedance want a moving-coil input with at least 60dB of gain or an MM stage paired with a step-up transformer (1:10 to 1:20 turns ratio). Recommended load is greater than 100 ohms, with 100, 470, and 1k ohms all common starting points.\u003c\/p\u003e\n\n\u003ch5\u003eML versus MH and the Step Up to Umami Blue\u003c\/h5\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/hana-mh-moving-coil-phono-cartridge\"\u003eMH\u003c\/a\u003e is the high-output sibling to the ML. Same Microline stylus, same aluminum cantilever, same Delrin body, same brass cap, same 9.5-gram weight. Only the coil winding differs: MH is 2.0mV at 130-ohm coil impedance for MM phono inputs; ML is 0.4mV at 8-ohm coil impedance for MC stages. If you have an MC phono stage, the ML's lower coil impedance generally tracks with cleaner generator behavior and is the technically purer choice. The Umami Blue is the step up at $2,500. It uses the same lower-impedance Alnico generator family (the ML was the prototype) and the same Microline tip family, but adds a boron cantilever instead of aluminum and a refined body. Boron is stiffer and lighter than aluminum, which translates to faster transient response and finer high-frequency detail at the top end. Buyers who already run a high-resolution front end (a $4,000-plus turntable, a reference-tier MC phono stage) hear the Umami Blue's added clarity clearly.\u003c\/p\u003e\n\n\u003ch5\u003eExplore the HANA Cartridge Lineup\u003c\/h5\u003e\n\u003cp\u003eThe M Series stablemate plus the next step up:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/hana-mh-moving-coil-phono-cartridge\"\u003eHANA MH\u003c\/a\u003e\u003c\/strong\u003e: high-output (2.0mV) version of the M Series, runs straight into MM phono inputs. Same Microline stylus, same Delrin body, same $1,200 price point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/hana-umami-blue-moving-coil-cartridge\"\u003eHANA Umami Blue\u003c\/a\u003e\u003c\/strong\u003e: the upgrade to the Umami line at $2,500. Boron cantilever instead of aluminum, refined body, and the same low-impedance Alnico generator architecture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eThe Listening Room Difference\u003c\/h5\u003e\n\u003cp\u003eWe're a third-generation family business with a brick-and-mortar showroom in Chestertown, Maryland, and a reputation built on exceptional service and relentless passion for hifi. Whether you're visiting in person or ordering online, we bring decades of experience, personalized service, and honest guidance to every interaction. We don't just ship boxes. We help build systems, answer your questions like real humans, and make sure every detail of your setup is right, from the cables to the final connection. Our passion is helping you get the most out of your gear, with support that lasts well beyond the sale.\u003c\/p\u003e\n\n\u003ch5\u003eHANA ML Phono Cartridge Specifications\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eMoving Coil (Low Output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eStylus\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003eNude Microline Tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eCantilever\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eMagnet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003eAlnico\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eMagnetic Circuitry\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003ePure Iron, Cryogenically Treated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eCoil Wire\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003eHigh Purity Copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eCartridge Housing\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003ePOM (Delrin) \/ Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eOutput Level\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e0.4mV \/ 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eVertical Tracking Force\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e2g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eTrackability\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e70 µm \/ 2g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eChannel Separation\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e30dB \/ 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e12 - 45,000Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eImpedance\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e8Ω \/ 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eSuggested Load Impedance\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e\u0026gt; 100Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eCartridge Weight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e9.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eHeight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e16.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n","brand":"HANA","offers":[{"title":"Default Title","offer_id":42405163565152,"sku":"HANAML","price":1200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/hana-ml-white-bg-1000x800px.jpg?v=1763460715"},{"product_id":"hana-mh-moving-coil-phono-cartridge","title":"HANA MH Moving Coil Phono Cartridge","description":"\u003cp\u003eThe HANA MH is the high-output (2.0mV) cartridge in Hana's M Series. It pairs a nude Microline stylus and aluminum cantilever with a Delrin (POM) chassis, an Alnico magnet, and a generator wound for standard MM phono inputs. The Microline tip is closer to a mastering lathe cutting head than the Shibata on the S MK II, which translates to finer detail and longer stylus life. The MH is the high-output step toward the \u003ca href=\"\/products\/hana-umami-blue-moving-coil-cartridge\"\u003eUmami Blue\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch5\u003eKey Features of HANA MH Phono Cartridge\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNude Microline stylus:\u003c\/strong\u003e a profile shaped like a vinyl mastering lathe's cutting head, with a longer and narrower vertical contact patch than Shibata for finer high-frequency detail and longer stylus life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum cantilever:\u003c\/strong\u003e rigid and light, paired with the nude diamond for low effective tip mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlnico magnet, pure-iron magnetic circuitry:\u003c\/strong\u003e the front yoke and pole pieces are pure iron and cryogenically treated; the magnet is Alnico for stable long-term field strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-output generator wound for MM compatibility:\u003c\/strong\u003e 2.0mV at 1kHz with a 130-ohm coil impedance, recommended into 47kΩ. Plugs into any MM phono input directly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelrin (POM) body with brass cap and threaded mounting:\u003c\/strong\u003e denser than the elastomer-coated body on the S MK II, with measurably better resonance damping. Headshell screws thread into metal, not plastic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.5g cartridge mass:\u003c\/strong\u003e heavier than the S MK II, mass-matches mid-mass tonearms cleanly and improves bass authority and dynamic snap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30dB channel separation, 12-45,000Hz frequency response:\u003c\/strong\u003e tighter separation specs than the S MK II Shibata models, wider frequency response at the top end.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eMicroline Stylus and Aluminum Cantilever\u003c\/h5\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/2_7c0d0f12-225c-457a-b608-9cc6ab4e71d0.jpg?v=1778170300\" alt=\"HANA MH cartridge with Microline stylus and aluminum cantilever\" style=\"width:100%;max-width:1000px;height:auto;border-radius:12px;margin:16px 0;\"\u003e\n\u003cp\u003eThe Microline tip is the most distinguishing change between the M Series and the S Series. Where a Shibata stylus has a hyperelliptical line-contact profile that sits relatively deep in the groove, a Microline has a longer and narrower contact patch shaped much closer to the cutting stylus that originally cut the vinyl master. That closer geometric match means the stylus reads finer high-frequency detail per pass, particularly the cymbal decay, sibilance overtones, and inner-groove violin information that a Shibata starts to lose. The longer contact patch also spreads stylus wear over more surface area, which translates to longer stylus life under the same tracking force and record-cleanliness conditions. The cantilever is aluminum, the same material Hana uses on the S MK II and a step below the boron cantilever introduced on the Umami Blue. The aluminum is rigid, light, and well-matched to the Microline tip's mass.\u003c\/p\u003e\n\n\u003ch5\u003eHigh-Output Generator and What It Means at the Phono Stage\u003c\/h5\u003e\n\u003cp\u003eThe MH generator is wound for 2.0mV output at 1kHz with a 130-ohm coil impedance, recommended into a 47kΩ load. That is a standard moving magnet input. Any MM phono stage will run the MH directly. No MC input required, no step-up transformer required, no 60dB MC gain stage required. Channel separation is 30dB at 1kHz, slightly tighter than the S MK II's 28dB. Frequency response extends from 12Hz to 45kHz, wider at the top than the S MK II's 32kHz ceiling, which the Microline geometry contributes to.\u003c\/p\u003e\n\n\u003ch5\u003ePure-Iron Yoke, Cryogenic Treatment, and the Alnico Magnet\u003c\/h5\u003e\n\u003cp\u003eThe MH magnetic circuitry uses pure iron yoke and pole pieces (rather than steel alloys), cryogenically treated. Cryogenic treatment is a slow controlled cool-down to roughly minus 300F followed by a slow return to room temperature, which refines grain boundaries in the metal, reduces internal stresses left over from machining, and (in audio applications) is associated with lower noise floor and better signal coherence. Hana applies the treatment to the front yoke and the center and rear magnetic-circuit components. The magnet itself is Alnico (aluminum-nickel-cobalt alloy), which holds a stable, predictable field over decades and is the same magnet material used in the higher-tier Umami line.\u003c\/p\u003e\n\n\u003ch5\u003eDelrin Body and Brass Mounting Cap\u003c\/h5\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/4.jpg?v=1778170303\" alt=\"HANA MH mounted in headshell showing brass mounting cap\" style=\"width:100%;max-width:1000px;height:auto;border-radius:12px;margin:16px 0;\"\u003e\n\u003cp\u003eThe MH body is injection-molded Delrin (DuPont's brand name for POM, a high-density acetal polymer). Delrin is denser than the elastomer-coated ABS used on the S MK II and damps body-borne resonance more effectively. The body weighs in heavier at 9.5 grams, which couples more positively to mid-mass tonearms and contributes to bass authority and dynamic snap. The top plate is a brass cap with built-in threaded mounting holes, so the headshell bolts thread into metal rather than into plastic body inserts. Installation is faster and the mechanical coupling between cartridge and headshell is more consistent over time. The brass cap is a small detail that makes a real difference at install: the headshell torque holds longer, alignment shifts less under load.\u003c\/p\u003e\n\n\u003ch5\u003eTonearm and Phono Stage Matching\u003c\/h5\u003e\n\u003cp\u003eEffective compliance is 10 x 10-6 cm\/dyne at 100Hz, recommended tracking force is 2.0 grams, and cartridge weight is 9.5 grams. That puts the MH in mid-mass tonearm territory, slightly closer to upper-mid than the S MK II. We pair it most often with the \u003ca href=\"\/products\/rega-rb880-tonearm\"\u003eRega RB880\u003c\/a\u003e, the \u003ca href=\"\/products\/michell-t8-tonearm\"\u003eMichell T8\u003c\/a\u003e, the \u003ca href=\"\/products\/oracle-audio-paris-tonearm\"\u003eOracle Paris\u003c\/a\u003e, and the \u003ca href=\"\/products\/oracle-audio-origine-tonearm\"\u003eOracle Origine\u003c\/a\u003e. Buyers stepping up to a longer-term reference setup move to the \u003ca href=\"\/products\/rega-rb3000-tonearm\"\u003eRega RB3000\u003c\/a\u003e or the \u003ca href=\"\/products\/michell-tecnoarm-2-tonearm\"\u003eMichell TecnoArm 2\u003c\/a\u003e. On the phono-stage side, the 2.0mV output and 47kΩ recommended load make the MH compatible with any moving magnet phono input. Buyers shopping a dedicated phono preamp at this cartridge price land most often on the \u003ca href=\"\/products\/chord-electronics-huei\"\u003eChord Electronics Huei\u003c\/a\u003e ($1,810) for the value entry, the \u003ca href=\"\/products\/cyrus-40-ppa-phono-preamplifier\"\u003eCyrus 40 PPA\u003c\/a\u003e ($3,695) for the sweet spot, or the \u003ca href=\"\/products\/michell-apollo-phono-stage-powered-by-muse\"\u003eMichell Apollo\u003c\/a\u003e ($4,999) for buyers building toward an Umami-tier cartridge.\u003c\/p\u003e\n\n\u003ch5\u003eMH versus ML and the SH MK II\u003c\/h5\u003e\n\u003cp\u003eThree Hana cartridges sit close to this price band. The \u003ca href=\"\/products\/hana-sh-mk-ii-moving-coil-phono-cartridge\"\u003eSH MK II\u003c\/a\u003e ($850) is the high-output S Series with a Shibata stylus and elastomer body. The MH is the high-output M Series at $1,200: same 2.0mV output as the SH, but Microline stylus, Delrin body, tighter channel separation specs, and wider frequency response. The \u003ca href=\"\/products\/hana-ml-moving-coil-phono-cartridge\"\u003eML\u003c\/a\u003e is the low-output M Series at the same $1,200 as the MH: same Microline stylus and Delrin body, but 0.4mV output at 8-ohm coil impedance for buyers with a high-quality MC stage. If your phono stage is MM only, the MH is the right cartridge in the M tier. If you have an MC stage, the ML's lower coil impedance generally tracks with a slight reduction in distortion at the generator and is the technically purer choice. Both cartridges sound very close, and the choice usually comes down to your phono stage rather than musical preference.\u003c\/p\u003e\n\n\u003ch5\u003eExplore the HANA Cartridge Lineup\u003c\/h5\u003e\n\u003cp\u003eThe M Series stablemate plus the next step up:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/hana-ml-moving-coil-phono-cartridge\"\u003eHANA ML\u003c\/a\u003e\u003c\/strong\u003e: low-output (0.4mV) version of the M Series, for MC phono stages. Same Microline stylus, same Delrin body, same $1,200 price point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/hana-umami-blue-moving-coil-cartridge\"\u003eHANA Umami Blue\u003c\/a\u003e\u003c\/strong\u003e: the upgrade to the Umami line at $2,500. Boron cantilever instead of aluminum, low-impedance Alnico generator, and the same Microline tip family. The MH and ML both share the Umami Blue's generator architecture (the M Series generator was the prototype), so the upgrade path is unusually direct.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eThe Listening Room Difference\u003c\/h5\u003e\n\u003cp\u003eWe're a third-generation family business with a brick-and-mortar showroom in Chestertown, Maryland, and a reputation built on exceptional service and relentless passion for hifi. Whether you're visiting in person or ordering online, we bring decades of experience, personalized service, and honest guidance to every interaction. We don't just ship boxes. We help build systems, answer your questions like real humans, and make sure every detail of your setup is right, from the cables to the final connection. Our passion is helping you get the most out of your gear, with support that lasts well beyond the sale.\u003c\/p\u003e\n\n\u003ch5\u003eHANA MH Phono Cartridge Specifications\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eMoving Coil (High Output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eStylus\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003eNude Microline Tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eCantilever\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eMagnet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003eAlnico\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eMagnetic Circuitry\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003ePure Iron, Cryogenically Treated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eCoil Wire\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003eHigh Purity Copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eCartridge Housing\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003ePOM (Delrin) \/ Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eOutput Level\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e2.0mV \/ 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eVertical Tracking Force\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e2g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eTrackability\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e70 µm \/ 2g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eDynamic Compliance\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e10 x 10-6 cm\/dyne\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eChannel Separation\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e30dB \/ 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e12 - 45,000Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eImpedance\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e130Ω \/ 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eSuggested Load Impedance\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e47kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eCartridge Weight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e9.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eHeight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e16.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n","brand":"HANA","offers":[{"title":"Default Title","offer_id":42405164056672,"sku":"HANAMH","price":1200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/hana-mh-white-bg-1000x800px.jpg?v=1763460826"},{"product_id":"rega-nd9-moving-magnet-cartridge","title":"Rega Nd9 Moving Magnet Cartridge","description":"\u003cp\u003eThe Rega Nd9 is more than just a new cartridge; it is a redefining of what is possible within the Moving Magnet (MM) format. Representing the absolute flagship of Rega's MM range, the Nd9 combines the user-friendly high output of a moving magnet design with the advanced material science typically reserved for high-end Moving Coil (MC) models. It is the first MM cartridge in the world to utilize a Neodymium N55 magnet, the strongest commercially available magnet. This groundbreaking power source is paired with an ultra-rigid boron cantilever and a Fine Line nude diamond stylus—the very same profile found on Rega’s reference £3,000+ Aphelion 2 MC cartridge. The result is a cartridge that offers unprecedented detail retrieval, stunning transient speed, and a expansive soundstage, all while remaining compatible with standard MM phono stages.\u003c\/p\u003e\n\u003ch5\u003eKey Features:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorld First Neodymium Design:\u003c\/strong\u003e The first Moving Magnet cartridge to utilize an N55 Neodymium magnet for superior power and a completely unique generator design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoron Cantilever:\u003c\/strong\u003e Features a solid Boron rod cantilever, offering exceptional stiffness and low mass for ultra-fast reaction to groove modulations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine Line Nude Diamond:\u003c\/strong\u003e Equipped with a precision \"Fine Line\" nude diamond stylus (borrowed from the reference Aphelion 2) for maximum detail retrieval and superior tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Generator Geometry:\u003c\/strong\u003e Completely new generator with perfect symmetry and miniaturized parallel coils for accurate channel balance and linearity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass Filled PPS Body:\u003c\/strong\u003e Housed in a zero-tolerance, injection-moulded polyphenylene sulphide (PPS) body for extreme rigidity and low mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRega 3-Point Mounting:\u003c\/strong\u003e Designed with Rega’s unique 3-point fixing system for a rigid, seamless connection to Rega tonearms (also compatible with standard 2-screw headshells).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eA Convergence of Technologies\u003c\/h5\u003e\n\u003cp\u003eThe Nd9 bridges the gap between MM and MC like never before. The challenge in creating this masterpiece was connecting the high-power Neodymium magnet system to a solid Boron cantilever. Rega achieved this by collaborating with a luxury watchmaker to fabricate an ultra-fine connecting tube. This engineering feat allows the Nd9 to maintain the high output voltage (5-6mV) of an MM cartridge while gaining the mechanical advantages—stiffness, speed, and low resonance—of a Boron assembly, previously the domain of exotic MCs.\u003c\/p\u003e\n\u003ch5\u003eReference-Level Tracking\u003c\/h5\u003e\n\u003cp\u003eAt the tip of the Boron cantilever sits a Fine Line nude diamond. This complex stylus profile, with a minor radius of just 3µm, presents an exceptionally small contact area to the groove wall. This allows it to trace the most minute high-frequency details and subtle spatial cues that lesser styli simply miss. When combined with the zero-tolerance generator alignment, the Nd9 delivers a level of clarity and channel separation that rivals cartridges costing significantly more.\u003c\/p\u003e\n\u003ch5\u003eThe Neodymium Advantage\u003c\/h5\u003e\n\u003cp\u003eTraditional MM cartridges use heavy bar magnets that can make the moving assembly sluggish. By using Neodymium (Nd) N55, Rega has created a generator that is powerful yet lightweight. This reduction in mass allows the suspension to react faster to transients, resulting in a sound that is punchy, dynamic, and thrillingly alive. The optimized pole gap further enhances linearity, pushing the soundstage wider and deeper than any previous Rega MM design.\u003c\/p\u003e\n\u003ch5\u003ePrecision Build\u003c\/h5\u003e\n\u003cp\u003eHand-built by skilled technicians in the UK, the Nd9 is housed in a body made from glass-filled Polyphenylene Sulphide (PPS). This high-tech material is lightweight yet incredibly rigid, minimizing stress on the tonearm bearings and preventing energy absorption. The cartridge is finished with a distinctive Amber window, marking its status as the leader of the Nd range.\u003c\/p\u003e\n\u003ch5 class=\"p1\"\u003eThe Listening Room Difference\u003c\/h5\u003e\n\u003cp class=\"p1\"\u003eWe’re a third-generation family business with a brick-and-mortar showroom in Chestertown, Maryland, and a reputation built on trust, not hype. Whether you’re visiting in person or ordering online, we bring decades of experience, personalized service, and honest guidance to every interaction. We don’t just ship boxes. We help build systems, answer your questions like real humans, and make sure every detail of your setup is right, from the cables to the final connection. Our passion is helping you get the most out of your gear, with support that lasts well beyond the sale.\u003c\/p\u003e\n\u003cp\u003eThe Nd9 comes factory-fitted and aligned on the \u003ca href=\"\/products\/rega-planar-6-rs-edition-turntable\"\u003eRega Planar 6 RS Edition\u003c\/a\u003e, mounted to the RB880 tonearm for optimal performance out of the box.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMoving Magnet (MM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStylus Profile\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFine Line Nude Diamond\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCantilever\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSolid Boron Rod\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMagnet Type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNeodymium (N55)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eNominal Output Voltage\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5 - 6 mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTracking Pressure\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.75 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCoils\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMiniaturised Parallel Coils (38-micron wire)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMounting\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRega 3-Point Fixing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBody Material\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eGlass Filled PPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWindow Colour\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAmber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Rega","offers":[{"title":"Default Title","offer_id":42433654620256,"sku":"REGND9","price":1045.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/Nd9_mod3_3__1.jpg?v=1765472442"},{"product_id":"dynavector-dv-20x2-moving-coil-phono-cartridge","title":"Dynavector DV-20X2 Moving Coil Phono Cartridge","description":"\u003cp\u003eThe Dynavector DV-20X2 moving coil phono cartridge delivers the detail and dynamics of Dynavector's higher-end designs at a price point that makes serious analog performance accessible. Available in both low output (0.3mV) and high output (2.8mV) versions, the DV-20X2 incorporates Dynavector's proprietary flux damper and softened magnetism technologies, a micro ridge nude diamond stylus, and a solid aluminum alloy body, delivering tracking precision and musicality that punches well above its weight class.\u003c\/p\u003e\n\n\u003cp\u003eThe DV-20X2 hits a sweet spot in the Dynavector lineup. It's the entry point for their flux damper technology, which carries through every cartridge up to the flagship DRT XV-1t. If you're running a quality turntable and want a cartridge that reveals more of what's in the groove without demanding a reference-level phono stage, start here. It rewards good setup and pairs particularly well with Dynavector's own P75 Mk4 phono preamplifier.\u003c\/p\u003e\n\n\u003ch5\u003eKey Features of the Dynavector DV-20X2\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicro Ridge Nude Diamond Stylus:\u003c\/strong\u003e Precision-cut stylus profile sits deeper in the groove wall, extracting more musical information with lower distortion and extended wear life compared to standard elliptical profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlux Damper Technology:\u003c\/strong\u003e Dynavector's magnetic flux damping system controls unwanted electromagnetic interference within the generator, reducing distortion and improving clarity across the frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftened Magnetism Design:\u003c\/strong\u003e Neodymium magnets are treated with Dynavector's softened magnetism process, smoothing the magnetic field for more natural, less fatiguing sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Output Options:\u003c\/strong\u003e Available as Low Output (0.3mV, 5 ohm) for dedicated MC phono stages, or High Output (2.8mV, 150 ohm) for use with standard MM phono inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Aluminum Alloy Body:\u003c\/strong\u003e Rigid, non-resonant construction provides a stable platform for the generator assembly, minimizing vibration-induced coloration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6mm Hard Aluminum Cantilever:\u003c\/strong\u003e Short, stiff cantilever pipe provides fast transient response and accurate tracking at the recommended 1.8 to 2.2 gram tracking force.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Compatibility:\u003c\/strong\u003e 12 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne compliance makes the DV-20X2 suitable for medium to high mass tonearms, including Dynavector's own DV-507 Mk2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eDynavector's Flux Damper Technology\u003c\/h5\u003e\n\u003cp\u003eThe DV-20X2 is the entry point in Dynavector's lineup for their flux damper system. In a moving coil cartridge, the coils move within a magnetic field to generate the audio signal. Stray magnetic flux from the magnets can interact with the signal in unwanted ways, adding a subtle haze or hardness to the sound. Dynavector's flux damper uses carefully positioned conductive elements to absorb and dissipate this stray flux before it contaminates the signal. The result is a cleaner, more transparent presentation with better separation between instruments and a lower noise floor. This same technology is used in every Dynavector cartridge from the DV-20X2 up through the flagship DRT XV-1t.\u003c\/p\u003e\n\n\u003ch5\u003eSoftened Magnetism and Neodymium Magnets\u003c\/h5\u003e\n\u003cp\u003eDynavector's softened magnetism approach addresses a common issue with high-energy neodymium magnets: while they produce strong, efficient magnetic fields (essential for low-output MC cartridges), their field shape can be abrupt at the edges, causing subtle distortion as the coils move through transition zones. By treating the magnets to soften these field boundaries, Dynavector achieves a more linear, gradual magnetic field. This translates to smoother tracking of complex musical passages, particularly during loud or dynamically demanding sections where the stylus excursion is greatest.\u003c\/p\u003e\n\n\u003ch5\u003eOutput Options: Low vs. High\u003c\/h5\u003e\n\u003cp\u003eThe DV-20X2 is available in two output configurations to match different phono stage setups. The Low Output version (0.3mV, 5 ohm impedance) is designed for dedicated MC phono stages or step-up transformers, with a recommended load impedance of 30 ohms or greater. The High Output version (2.8mV, 150 ohm impedance) produces enough signal to drive standard MM phono inputs rated at 47k ohms, making it an ideal upgrade path for listeners whose current phono stage doesn't support MC cartridges. Both versions share the same generator design, stylus, and body construction; the difference is solely in the coil winding.\u003c\/p\u003e\n\n\u003ch5\u003eBuild Quality and Construction\u003c\/h5\u003e\n\u003cp\u003eThe DV-20X2's body is machined from solid aluminum alloy, providing a rigid, non-resonant housing for the generator assembly. At 9.2 grams, it sits comfortably within the mounting weight range of most tonearms. The cartridge uses standard half-inch mounting with accessible screw holes, making installation straightforward. The short 6mm hard aluminum cantilever pipe is bonded directly to the micro ridge nude diamond stylus, keeping the mechanical path between groove and generator as direct as possible.\u003c\/p\u003e\n\n\u003ch5\u003eExplore the Full Dynavector Cartridge Range\u003c\/h5\u003e\n\u003cp\u003eThe DV-20X2 sits in the middle of Dynavector's cartridge lineup, offering flux damper technology at an accessible price. Looking for a different performance level? Explore the rest of the range:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/dynavector-dv-10x5-mk2-moving-coil-phono-cartridge\"\u003eDV-10X5 Mk2\u003c\/a\u003e\u003c\/strong\u003e - Entry-level MC cartridge with nude elliptical stylus and dual output options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/dynavector-dv-20x2a-moving-coil-phono-cartridge-1\"\u003eDV-20X2A\u003c\/a\u003e\u003c\/strong\u003e - Upgraded DV-20X2 with micro-ridge diamond stylus for finer detail retrieval.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/dynavector-xx-2a-moving-coil-phono-cartridge-1\"\u003eXX-2A\u003c\/a\u003e\u003c\/strong\u003e - Boron cantilever and line-contact stylus for reference-level tracking precision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/dynavector-karat-17dx-moving-coil-phono-cartridge-1\"\u003eKarat 17DX\u003c\/a\u003e\u003c\/strong\u003e - Legendary diamond cantilever design in a 24-karat gold-plated body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/dynavector-te-kaitora-rua-moving-coil-phono-cartridge\"\u003eTe Kaitora Rua\u003c\/a\u003e\u003c\/strong\u003e - Flagship-tier performance with boron cantilever and softened magnetism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/dynavector-drt-xv-1s-moving-coil-phono-cartridge\"\u003eDRT XV-1s\u003c\/a\u003e\u003c\/strong\u003e - Reference cartridge with diamond cantilever and Direct Rear Terminal construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/dynavector-drt-xv-1t-moving-coil-phono-cartridge\"\u003eDRT XV-1t\u003c\/a\u003e\u003c\/strong\u003e - Dynavector's ultimate statement, hand-built with the finest materials and tolerances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eThe Listening Room Difference\u003c\/h5\u003e\n\u003cp\u003eWe're a third-generation family business with a brick-and-mortar showroom in Chestertown, Maryland, and a reputation built on exceptional service and relentless passion for hifi. Whether you're visiting in person or ordering online, we bring decades of experience, personalized service, and honest guidance to every interaction. We don't just ship boxes. We help build systems, answer your questions like real humans, and make sure every detail of your setup is right, from the cables to the final connection. Our passion is helping you get the most out of your gear, with support that lasts well beyond the sale.\u003c\/p\u003e\u003ch5\u003eDynavector DV-20X2 Specifications\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Voltage (Low)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.3mV (1kHz, 5cm\/sec)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Voltage (High)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.8mV (1kHz, 5cm\/sec)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20Hz - 20kHz (±2dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Separation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;25dB (1kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Balance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.0dB (1kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTracking Force\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.8 - 2.2g (2.0g nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance (Low)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance (High)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e150 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended Load (Low)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;30 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended Load (High)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;1,000 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMicro Ridge Nude Diamond\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCantilever\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6mm Hard Aluminum Pipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSolid Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9.2g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Dynavector","offers":[{"title":"Low Output (0.3mV)","offer_id":42563554639968,"sku":"DYNA20X2L","price":1250.0,"currency_code":"USD","in_stock":true},{"title":"High Output (2.8mV)","offer_id":42563554902112,"sku":"DYNA20X2H","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/01_front_hero_977ae2b9-a4e4-4a9f-bdfb-472ac4ed62ed.jpg?v=1770405762"},{"product_id":"dynavector-dv-20x2a-moving-coil-phono-cartridge-1","title":"Dynavector DV-20X2A Moving Coil Phono Cartridge","description":"\u003cp\u003eThe Dynavector DV-20X2A builds on the proven 20X2 platform with a newly developed magnetic circuit featuring Special Magnetic Annealing and pure iron core components. The micro-ridge nude diamond stylus (2-micron radius) extracts fine detail from vinyl grooves with exceptional precision, while the annealed magnetic circuit delivers measurably lower distortion than its predecessor. Available in low output (0.3mV) and high output (2.5mV) configurations at $1,450.\u003c\/p\u003e\n\n\u003cp\u003eThe 20X2A represents a meaningful upgrade within Dynavector's mid-range. Where the standard 20X2 already outperforms most cartridges in its price class thanks to its flux damper and micro-ridge stylus, the 20X2A refines the magnetic circuit itself. Dynavector's Special Magnetic Annealing process treats the pure iron core components to achieve more uniform magnetic behavior, which translates to improved dynamics and lower noise. If you're looking for the best cartridge under $1,500 that works with a standard MM input, the high-output 20X2A is hard to beat.\u003c\/p\u003e\n\n\u003ch5\u003eKey Features of the Dynavector DV-20X2A\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Magnetic Annealing:\u003c\/strong\u003e Pure iron core treated with optimized annealing process for reduced distortion and improved magnetic linearity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicro-Ridge Nude Diamond Stylus:\u003c\/strong\u003e 2-micron radius contact edge traces the finest groove modulations for maximum detail retrieval and minimal record wear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Flux Damper:\u003c\/strong\u003e Absorbs stray magnetic energy to reduce distortion and improve channel separation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented Softened Magnets:\u003c\/strong\u003e Neodymium magnets with controlled field geometry minimize eddy currents and hysteresis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Output Options:\u003c\/strong\u003e Low output (0.3mV, 5 ohm) for MC stages or high output (2.8mV, 150 ohm) for MM inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure Iron Core:\u003c\/strong\u003e Upgraded core material provides better magnetic conductivity and lower core losses than standard alloys\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened Aluminum Cantilever:\u003c\/strong\u003e 6mm cantilever balances rigidity with the compliance needed for stable tracking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Aluminum Alloy Body:\u003c\/strong\u003e Machined construction eliminates resonance and ensures reliable headshell mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eWhat Changed from the DV-20X2\u003c\/h5\u003e\n\u003cp\u003eThe DV-20X2A retains the 20X2's mechanical design, including its micro-ridge stylus, hardened aluminum cantilever, and flux-damped body. The key upgrade is the magnetic circuit: the 20X2A uses pure iron core components processed with Dynavector's Special Magnetic Annealing. This heat treatment optimizes the magnetic domain structure within the iron, achieving more linear and uniform field behavior than the standard 20X2's magnetic circuit. The practical result is lower harmonic and intermodulation distortion, improved dynamic contrast, and more consistent performance across the output range. If you currently own a 20X2, the 20X2A is a direct physical replacement with the same mounting dimensions and tonearm compatibility.\u003c\/p\u003e\n\n\u003ch5\u003eMicro-Ridge Stylus with 2-Micron Radius\u003c\/h5\u003e\n\u003cp\u003eThe micro-ridge profile on the 20X2A features a 2-micron contact radius, one of the finest contact edges available in any cartridge. This narrow profile traces groove modulations that wider styli simply skip over, retrieving high-frequency detail and spatial information that contribute to a more complete and dimensional presentation. The nude-mounted diamond eliminates the bonding layer found in cheaper cartridges, reducing tip mass and improving transient accuracy. Combined with the 6mm hardened aluminum cantilever, the assembly delivers fast, controlled tracking at the recommended 2.0g force.\u003c\/p\u003e\n\n\u003ch5\u003eSpecial Magnetic Annealing Technology\u003c\/h5\u003e\n\u003cp\u003eDynavector's Special Magnetic Annealing is a controlled heat treatment applied to the pure iron core components of the generator assembly. The process aligns the magnetic domains within the iron to achieve more uniform field distribution. In practice, this reduces the nonlinear behavior that causes harmonic distortion in the output signal. The annealed core works in concert with the neodymium magnets (processed with Dynavector's patented softened magnet technology) and the magnetic flux damper to deliver a cleaner, more linear output than the standard 20X2.\u003c\/p\u003e\n\n\u003ch5\u003eLow Output and High Output Versions\u003c\/h5\u003e\n\u003cp\u003eThe low output DV-20X2A produces 0.3mV at just 5 ohms impedance, ideal for MC phono stages loaded at 30 ohms or higher. The low impedance ensures the cartridge presents an easy electrical load to the phono preamp. The high output version produces 2.8mV at 150 ohms, fully compatible with any standard MM phono input loaded at 1,000 ohms or above. Both versions share the same micro-ridge stylus and annealed magnetic circuit.\u003c\/p\u003e\n\n\u003ch5\u003eExplore the Full Dynavector Cartridge Lineup\u003c\/h5\u003e\n\u003cp\u003eThe DV-20X2A is Dynavector's top mid-range offering. Here's how it fits in the lineup:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/dynavector-dv-20x2-moving-coil-phono-cartridge\"\u003eDynavector DV-20X2\u003c\/a\u003e\u003c\/strong\u003e - The original model without Special Magnetic Annealing, at a lower price.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/dynavector-dv-10x5a-moving-coil-phono-cartridge-1\"\u003eDynavector DV-10X5A\u003c\/a\u003e\u003c\/strong\u003e - Entry-level with Shibata III stylus and annealed magnetics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/dynavector-xx-2a-moving-coil-phono-cartridge-1\"\u003eDynavector XX-2A\u003c\/a\u003e\u003c\/strong\u003e - Steps up to a boron cantilever for reference-level tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/dynavector-karat-17dx-moving-coil-phono-cartridge-1\"\u003eDynavector Karat 17DX\u003c\/a\u003e\u003c\/strong\u003e - Diamond cantilever in a gold-plated body for maximum detail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eThe Listening Room Difference\u003c\/h5\u003e\n\u003cp\u003eWe're a third-generation family business with a brick-and-mortar showroom in Chestertown, Maryland, and a reputation built on exceptional service and relentless passion for hifi. Whether you're visiting in person or ordering online, we bring decades of experience, personalized service, and honest guidance to every interaction. We don't just ship boxes. We help build systems, answer your questions like real humans, and make sure every detail of your setup is right, from the cables to the final connection. Our passion is helping you get the most out of your gear, with support that lasts well beyond the sale.\u003c\/p\u003e\u003ch5\u003eDynavector DV-20X2A Specifications\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMoving coil cartridge with Special Magnetic Annealing, flux damper, and softened magnetism\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLow: 0.3mV \/ High: 2.8mV (at 1kHz, 5cm\/sec)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20Hz - 20kHz (±2dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Separation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;25dB (at 1kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Balance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.0dB (at 1kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLow: 5 ohms \/ High: 150 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended Load\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLow: \u0026gt;30 ohms \/ High: \u0026gt;1,000 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12mm\/N (12 x 10⁻⁶ cm\/dyne)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTracking Force\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.8 - 2.2g (2.0g nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStylus\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMicro-ridge nude diamond (2-micron radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCantilever\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6mm hardened aluminum pipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSolid aluminum alloy with flux damper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9.2g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Dynavector","offers":[{"title":"Low Output (0.3mV)","offer_id":42563558703200,"sku":"DYNA20X2AL","price":1450.0,"currency_code":"USD","in_stock":true},{"title":"High Output (2.5mV)","offer_id":42563558735968,"sku":"DYNA20X2AH","price":1450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/02_front_97d1ded5-23b4-44b3-99bb-c0d5976fefcb.jpg?v=1770406144"},{"product_id":"grado-reference4-phono-cartridge","title":"Grado Reference4 Phono Cartridge","description":"\u003cp\u003eThe Grado Reference4 is the flagship of Grado's Timbre Series of wood-bodied moving iron phono cartridges, pairing an elliptical diamond stylus with a machined boron cantilever in an American Osage housing. Available in four configurations (high-output and low-output, stereo and mono), the Reference4 uses Grado's patented flux-bridger generator with OCC copper coils to deliver the series' most detailed and controlled performance.\u003c\/p\u003e\n\n\u003ch5\u003eKey Features of the Grado Reference4\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElliptical Diamond Stylus:\u003c\/strong\u003e Dual-radius contact profile for accurate tracking and natural tonal balance across the frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachined Boron Cantilever:\u003c\/strong\u003e Five-piece OTL cantilever design achieving additional tip mass reduction over the Sonata4 and Platinum4 models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlux-Bridger Moving Iron Generator:\u003c\/strong\u003e Grado's patented system combines moving coil transient speed with moving magnet output and loading simplicity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOCC Copper Coils:\u003c\/strong\u003e Oxygen-free continuous-cast copper for improved signal purity and channel balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmerican Osage Wood Housing:\u003c\/strong\u003e Dense domestic hardwood with natural resonance damping properties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Output Configurations:\u003c\/strong\u003e High-output (4.0mV) and low-output (1.0mV) in both stereo and mono, matching any phono stage and record collection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-Built in Brooklyn, NY:\u003c\/strong\u003e Assembled and voiced at Grado's Sunset Park facility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eAbout Grado Labs\u003c\/h5\u003e\n\u003cp\u003eGrado Labs has been building phono cartridges and headphones by hand in Brooklyn, New York since 1953. Four generations of the Grado family have refined the company's patented flux-bridger moving iron generator system, which delivers the speed and detail retrieval associated with moving coil designs while maintaining the higher output and simpler loading requirements of moving magnet cartridges. Every Grado cartridge is hand-assembled in the same Sunset Park facility where Joseph Grado first began his work over seven decades ago, then tested and voiced before it ships.\u003c\/p\u003e\n\n\u003ch5\u003eMachined Boron Cantilever with OTL Technology\u003c\/h5\u003e\n\u003cp\u003eThe Reference4 and Master4 both use Grado's five-piece OTL (Optimized Tip-to-Link) cantilever technology, achieving an additional 5% tip mass reduction compared to the four-piece design used in the Sonata4 and Platinum4. The machined boron cantilever provides exceptional stiffness relative to its weight, transmitting stylus vibrations to the generator efficiently without the energy storage that softer materials introduce. The difference between the Reference4 and Master4 comes down to component selection and tolerancing, with the Reference4 receiving the tightest grading in the Timbre Series.\u003c\/p\u003e\n\u003c!-- inline image --\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/reference4-inline-01.jpg?v=1778523363\" alt=\"Grado Reference4 phono cartridge, American Osage wood housing, Timbre Series flagship\" style=\"width:100%;max-width:1000px;height:auto;border-radius:12px;margin:16px 0;\"\u003e\n\u003cp\u003eAt the Reference4 level, component grading is the lever. The cantilever assembly, generator coils, magnet pole pieces, and stylus profile inspection all receive the line's strictest tolerances. The flagship status means a unit failing any of the Reference4 inspection thresholds drops down to Master4 inventory, not back into a Reference4 box. That is how Grado maintains the consistency that lets the Reference4 sit at the top of the Timbre line without resorting to a separate generator design.\u003c\/p\u003e\n\n\u003ch5\u003eAmerican Osage Wood Housing\u003c\/h5\u003e\n\u003cp\u003eNew to the \/4 generation, the Reference4 and Master4 are housed in American Osage wood, replacing the Australian Jarrah used in previous Timbre models. Osage is among the densest and hardest domestic hardwoods available, with natural damping properties that help isolate the generator from airborne and mechanical vibrations. The updated housing geometry in the \/4 series also improves installation stability, making cartridge alignment easier during setup.\u003c\/p\u003e\n\u003c!-- inline image --\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/reference4-inline-02.jpg?v=1778523367\" alt=\"Grado Reference4 cartridge profile showing five-piece OTL boron cantilever\" style=\"width:100%;max-width:1000px;height:auto;border-radius:12px;margin:16px 0;\"\u003e\n\u003cp\u003eOsage is not a common cartridge housing material outside of Grado. The species is native to the central United States and was historically prized for bow staves and tool handles because of how hard and dense it stays at typical moisture content. The wood also holds its dimensions under humidity swings, which makes it a strong housing material for a cartridge generator: it does not move the way some hardwoods do, and its damping behavior holds up across the cartridge's working temperature range.\u003c\/p\u003e\n\n\u003ch5\u003eHigh-Output and Low-Output Options\u003c\/h5\u003e\n\u003cp\u003eThe Reference4 is available in both 4.0mV (high-output) and 1.0mV (low-output) versions. The high-output version works with any standard moving magnet phono input, while the low-output version pairs with MC-capable phono stages for potentially wider dynamic range and lower noise floor. Both output levels are available in stereo and mono configurations, giving the Reference4 the broadest compatibility of any Grado cartridge.\u003c\/p\u003e\n\n\u003ch5\u003eExplore the Full Grado Timbre Series\u003c\/h5\u003e\n\u003cp\u003eThe Reference4 is the flagship of Grado's Timbre Series. All five Timbre models share the flux-bridger generator and elliptical diamond stylus, with differences in cantilever technology, housing material, and component grading:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/grado-master4-phono-cartridge\"\u003eGrado Master4\u003c\/a\u003e\u003c\/strong\u003e - Machined boron cantilever in American Osage, the Reference4's closest companion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/grado-sonata4-phono-cartridge\"\u003eGrado Sonata4\u003c\/a\u003e\u003c\/strong\u003e - Aluminum cantilever in Mediterranean Olive wood, the mid-point of the Timbre lineup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/grado-platinum4-phono-cartridge\"\u003eGrado Platinum4\u003c\/a\u003e\u003c\/strong\u003e - Aluminum cantilever in Mediterranean Olive wood, sharing the Sonata4's architecture with looser grading tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/grado-opus4-phono-cartridge\"\u003eGrado Opus4\u003c\/a\u003e\u003c\/strong\u003e - Aluminum cantilever in North American Maple, the Timbre entry point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eListeners ready to move beyond the Timbre Series step up to the Grado \u003ca href=\"\/products\/grado-statement4-phono-cartridge\"\u003eStatement4\u003c\/a\u003e, the entry to the flagship \u003ca href=\"\/collections\/grado-lineage-cartridges\"\u003eLineage Series\u003c\/a\u003e with its nude Shibata diamond stylus.\u003c\/p\u003e\n\n\n\u003ch5\u003eThe Flux-Bridger Moving Iron Generator\u003c\/h5\u003e\n\u003cp\u003eEvery Timbre Series cartridge runs on Grado's flux-bridger moving iron generator, a patented design that sits between conventional moving magnet and moving coil topologies. In a moving iron generator, the coils and magnets stay fixed while a small, low-mass iron armature on the cantilever responds to groove modulations. Because the moving element is just iron, not a magnet or a coil pack, the system carries less moving mass than a standard MM and roughly comparable mass to many MC designs, which is what gives Grado cartridges their characteristic speed and transient detail.\u003c\/p\u003e\n\u003cp\u003eThe practical advantage is loading simplicity. Both high-output and low-output Timbre cartridges present an inductive load that any moving magnet phono stage can drive (high-output versions) or that any MC-capable stage can handle (low-output versions). There is no compromise on cartridge loading, no need for step-up transformers on the high-output models, and no exotic phono stage requirement. The flux-bridger architecture also makes Grado cartridges relatively tolerant of capacitance variation in the tonearm cable, which simplifies setup compared to some MM designs that depend on precise capacitive loading to flatten their response.\u003c\/p\u003e\n\n\u003ch5\u003eOCC Copper Coil Wire\u003c\/h5\u003e\n\u003cp\u003eThe Timbre Series uses oxygen-free continuous-cast copper for the generator coil wire, the same OCC copper specification used across the entire \/4 generation. Continuous-cast copper is drawn through a heated mold in a single, unbroken process, producing long crystal grains aligned with the wire's length. The result is a wire with fewer grain boundaries per inch than conventional oxygen-free copper, which translates into more consistent electrical behavior across the audio band and improved channel-to-channel matching when paired coils are wound from the same batch.\u003c\/p\u003e\n\u003cp\u003eCoil wire matters more in moving iron designs than it does in many MM cartridges because the generator's output is directly tied to the coil's electrical characteristics. Grado specifies OCC across every Timbre model precisely because consistency at the coil is one of the cleanest ways to lock in repeatable performance unit to unit.\u003c\/p\u003e\n\n\u003ch5\u003eHigh-Output, Low-Output, Stereo, Mono\u003c\/h5\u003e\n\u003cp\u003eEvery Timbre cartridge ships in four configurations: high-output stereo (4.0mV), low-output stereo (1.0mV), high-output mono, and low-output mono. The high-output 4.0mV version pairs with any standard MM phono input, the same input that handles the vast majority of installed phono stages. The 1.0mV low-output version is intended for MC-capable phono stages or step-up transformers; the lower output trades some absolute gain for a potentially quieter noise floor and (depending on the phono stage's MC topology) more headroom on dynamic passages.\u003c\/p\u003e\n\u003cp\u003eThe mono configurations are true mono generators with the coils summed at the cartridge, not a stereo cartridge with a mono switch in the preamp. For collectors with significant pre-1958 mono LPs, a true mono cartridge eliminates vertical groove noise that a stereo pickup will reproduce as rumble or surface hash, and it improves apparent resolution on the playback of mono pressings. The mono variants are marked Special Order and No Returns, consistent with how most cartridge manufacturers handle true-mono SKUs.\u003c\/p\u003e\n\n\u003ch5\u003eTracking Force and Compliance\u003c\/h5\u003e\n\u003cp\u003eAll five Timbre models share the same tracking-force window of 1.6 to 1.9 grams, with most installations dialing in at 1.75 grams as a starting point. Compliance is specified at 20 µm\/mN, which places the Timbre Series squarely in the medium-compliance range that pairs comfortably with most modern tonearms. Effective mass between 9 and 14 grams at the headshell is the sweet spot. Cartridge weight runs 9 grams across the aluminum-cantilever models (Opus4 through Sonata4) and steps up to 10 grams on the Master4 and Reference4, so headshell weight is the main variable to balance during arm matching.\u003c\/p\u003e\n\u003cp\u003eFor VTA, start parallel to the record surface and adjust by ear once break-in is past the first 20 to 30 hours. Cartridges in this category typically need that early use time before the suspension settles into its working stiffness.\u003c\/p\u003e\n\u003ch5\u003eThe Listening Room Difference\u003c\/h5\u003e\n\u003cp\u003eWe're a third-generation family business with a brick-and-mortar showroom in Chestertown, Maryland, and a reputation built on exceptional service and relentless passion for hifi. Whether you're visiting in person or ordering online, we bring decades of experience, personalized service, and honest guidance to every interaction. We don't just ship boxes. We help build systems, answer your questions like real humans, and make sure every detail of your setup is right, from the cables to the final connection. Our passion is helping you get the most out of your gear, with support that lasts well beyond the sale.\u003c\/p\u003e\n\n\u003ch5\u003eGrado Reference4 Specifications\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eCartridge Type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eMoving Iron (Flux-Bridger)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eStylus\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eElliptical Diamond\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eCantilever\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eMachined Boron (5-Piece OTL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eOutput Voltage\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003e4.0mV (High Output) \/ 1.0mV (Low Output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eCoil Wire\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eOCC Copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eBody Material\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eAmerican Osage Wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eTracking Force\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003e1.6 - 1.9 grams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eCartridge Weight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003e10 grams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eCompliance\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003e20 µm\/mN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eStandard ½\" Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eConfigurations\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eHigh-Output Stereo, High-Output Mono, Low-Output Stereo, Low-Output Mono\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eOrigin\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eHand-built in Brooklyn, NY, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Grado","offers":[{"title":"High-Output Mono","offer_id":42681431490656,"sku":"GRADREF4HOMO","price":1500.0,"currency_code":"USD","in_stock":true},{"title":"Low-Output Stereo","offer_id":42681433391200,"sku":"GRADREF4LOST","price":1500.0,"currency_code":"USD","in_stock":true},{"title":"Low-Output Mono","offer_id":42681433423968,"sku":"GRADREF4LOMO","price":1500.0,"currency_code":"USD","in_stock":true},{"title":"High-Output Stereo","offer_id":42681433587808,"sku":"GRADREF4HOST","price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/grado-reference4-hero.jpg?v=1775507509"},{"product_id":"grado-master4-phono-cartridge","title":"Grado Master4 Phono Cartridge","description":"\u003cp\u003eThe Grado Master4 sits just below the Reference4 in Grado's Timbre Series, sharing the same machined boron cantilever and American Osage wood housing in a cartridge that balances performance and value. Built around Grado's patented flux-bridger moving iron generator with OCC copper coils, the Master4 is available in four configurations to match any phono stage and listening preference.\u003c\/p\u003e\n\n\u003ch5\u003eKey Features of the Grado Master4\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElliptical Diamond Stylus:\u003c\/strong\u003e Dual-radius profile for accurate tracking and balanced tonal presentation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachined Boron Cantilever:\u003c\/strong\u003e Five-piece OTL design with 5% lower tip mass than the four-piece cantilevers used in the Sonata4 and Platinum4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlux-Bridger Moving Iron Generator:\u003c\/strong\u003e Grado's patented low-mass generator for moving coil speed without the loading complexity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOCC Copper Coils:\u003c\/strong\u003e Oxygen-free continuous-cast copper for improved signal clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmerican Osage Wood Housing:\u003c\/strong\u003e Dense domestic hardwood with natural vibration damping, new to the \/4 generation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Output Configurations:\u003c\/strong\u003e High-output (4.0mV) and low-output (1.0mV) in stereo and mono.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-Built in Brooklyn, NY:\u003c\/strong\u003e Assembled and voiced at Grado's Sunset Park facility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eAbout Grado Labs\u003c\/h5\u003e\n\u003cp\u003eGrado Labs has been building phono cartridges and headphones by hand in Brooklyn, New York since 1953. Four generations of the Grado family have refined the company's patented flux-bridger moving iron generator system, which delivers the speed and detail retrieval associated with moving coil designs while maintaining the higher output and simpler loading requirements of moving magnet cartridges. Every Grado cartridge is hand-assembled in the same Sunset Park facility where Joseph Grado first began his work over seven decades ago, then tested and voiced before it ships.\u003c\/p\u003e\n\n\u003ch5\u003eBoron Cantilever and OTL Technology\u003c\/h5\u003e\n\u003cp\u003eThe Master4 shares the Reference4's five-piece OTL cantilever assembly with a machined boron rod. This construction reduces effective tip mass by approximately 5% compared to the four-piece OTL design in the Sonata4 and Platinum4, allowing the stylus to follow groove modulations more precisely. Boron's high stiffness-to-weight ratio means vibrations travel from the stylus tip to the generator with minimal delay or energy loss. The distinction between the Master4 and Reference4 is in component selection and quality grading, not architecture.\u003c\/p\u003e\n\u003c!-- inline image --\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/master4-inline-01.jpg?v=1778523355\" alt=\"Grado Master4 phono cartridge, American Osage wood housing\" style=\"width:100%;max-width:1000px;height:auto;border-radius:12px;margin:16px 0;\"\u003e\n\u003cp\u003eMachined boron is the same cantilever material used in many cost-no-object moving coil cartridges. Grado specifies it on the Master4 and Reference4 because the flux-bridger generator's transient response is fast enough to expose any energy storage in the cantilever, and boron's stiffness-per-gram is the highest of any material in widespread cartridge use short of single-crystal diamond. The trade-off is fragility: boron cantilevers are stiffer but more brittle than aluminum, which is one reason Grado retains aluminum on the lower-tier Opus4 through Sonata4 models where price-to-replacement-risk balance favors the more forgiving material.\u003c\/p\u003e\n\n\u003ch5\u003eAmerican Osage Wood Housing\u003c\/h5\u003e\n\u003cp\u003eNew to the \/4 generation, the Master4 and Reference4 are housed in American Osage, one of the densest and hardest domestic hardwoods. The wood provides natural vibration damping without the added mass of synthetic materials, and its resonant properties complement the flux-bridger generator's output characteristics. Grado has refined the housing geometry for the \/4 series, improving cartridge stability during playback and simplifying alignment during installation.\u003c\/p\u003e\n\u003c!-- inline image --\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/master4-inline-02.jpg?v=1778523359\" alt=\"Grado Master4 cartridge close-up showing machined boron cantilever\" style=\"width:100%;max-width:1000px;height:auto;border-radius:12px;margin:16px 0;\"\u003e\n\u003cp\u003eOsage's density (around 0.8 g\/cm³ at typical moisture content) is what gives the Master4 its housing character. The wood damps cartridge body resonances broadband rather than at any single peak, and its hardness allows for tight mounting tolerances at the threaded inserts. For installers, that means cartridge screws torque to a consistent stop without the housing creeping under load, which keeps azimuth from drifting between setup and final adjustment.\u003c\/p\u003e\n\n\u003ch5\u003eExplore the Full Grado Timbre Series\u003c\/h5\u003e\n\u003cp\u003eThe Master4 is the second-highest model in Grado's Timbre Series, positioned between the Reference4 and the Sonata4:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/grado-reference4-phono-cartridge\"\u003eGrado Reference4\u003c\/a\u003e\u003c\/strong\u003e - The Timbre flagship, with the tightest component selection in the series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/grado-sonata4-phono-cartridge\"\u003eGrado Sonata4\u003c\/a\u003e\u003c\/strong\u003e - Aluminum cantilever in Mediterranean Olive wood, offering Timbre performance at a lower price point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/grado-platinum4-phono-cartridge\"\u003eGrado Platinum4\u003c\/a\u003e\u003c\/strong\u003e - Aluminum cantilever in Mediterranean Olive wood, second-step in the line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/grado-opus4-phono-cartridge\"\u003eGrado Opus4\u003c\/a\u003e\u003c\/strong\u003e - Aluminum cantilever in North American Maple, the Timbre entry point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbove the Timbre Series, Grado's flagship \u003ca href=\"\/collections\/grado-lineage-cartridges\"\u003eLineage Series\u003c\/a\u003e introduces nude Shibata diamonds and sapphire or boron cantilevers.\u003c\/p\u003e\n\n\n\u003ch5\u003eThe Flux-Bridger Moving Iron Generator\u003c\/h5\u003e\n\u003cp\u003eEvery Timbre Series cartridge runs on Grado's flux-bridger moving iron generator, a patented design that sits between conventional moving magnet and moving coil topologies. In a moving iron generator, the coils and magnets stay fixed while a small, low-mass iron armature on the cantilever responds to groove modulations. Because the moving element is just iron, not a magnet or a coil pack, the system carries less moving mass than a standard MM and roughly comparable mass to many MC designs, which is what gives Grado cartridges their characteristic speed and transient detail.\u003c\/p\u003e\n\u003cp\u003eThe practical advantage is loading simplicity. Both high-output and low-output Timbre cartridges present an inductive load that any moving magnet phono stage can drive (high-output versions) or that any MC-capable stage can handle (low-output versions). There is no compromise on cartridge loading, no need for step-up transformers on the high-output models, and no exotic phono stage requirement. The flux-bridger architecture also makes Grado cartridges relatively tolerant of capacitance variation in the tonearm cable, which simplifies setup compared to some MM designs that depend on precise capacitive loading to flatten their response.\u003c\/p\u003e\n\n\u003ch5\u003eOCC Copper Coil Wire\u003c\/h5\u003e\n\u003cp\u003eThe Timbre Series uses oxygen-free continuous-cast copper for the generator coil wire, the same OCC copper specification used across the entire \/4 generation. Continuous-cast copper is drawn through a heated mold in a single, unbroken process, producing long crystal grains aligned with the wire's length. The result is a wire with fewer grain boundaries per inch than conventional oxygen-free copper, which translates into more consistent electrical behavior across the audio band and improved channel-to-channel matching when paired coils are wound from the same batch.\u003c\/p\u003e\n\u003cp\u003eCoil wire matters more in moving iron designs than it does in many MM cartridges because the generator's output is directly tied to the coil's electrical characteristics. Grado specifies OCC across every Timbre model precisely because consistency at the coil is one of the cleanest ways to lock in repeatable performance unit to unit.\u003c\/p\u003e\n\n\u003ch5\u003eHigh-Output, Low-Output, Stereo, Mono\u003c\/h5\u003e\n\u003cp\u003eEvery Timbre cartridge ships in four configurations: high-output stereo (4.0mV), low-output stereo (1.0mV), high-output mono, and low-output mono. The high-output 4.0mV version pairs with any standard MM phono input, the same input that handles the vast majority of installed phono stages. The 1.0mV low-output version is intended for MC-capable phono stages or step-up transformers; the lower output trades some absolute gain for a potentially quieter noise floor and (depending on the phono stage's MC topology) more headroom on dynamic passages.\u003c\/p\u003e\n\u003cp\u003eThe mono configurations are true mono generators with the coils summed at the cartridge, not a stereo cartridge with a mono switch in the preamp. For collectors with significant pre-1958 mono LPs, a true mono cartridge eliminates vertical groove noise that a stereo pickup will reproduce as rumble or surface hash, and it improves apparent resolution on the playback of mono pressings. The mono variants are marked Special Order and No Returns, consistent with how most cartridge manufacturers handle true-mono SKUs.\u003c\/p\u003e\n\n\u003ch5\u003eTracking Force and Compliance\u003c\/h5\u003e\n\u003cp\u003eAll five Timbre models share the same tracking-force window of 1.6 to 1.9 grams, with most installations dialing in at 1.75 grams as a starting point. Compliance is specified at 20 µm\/mN, which places the Timbre Series squarely in the medium-compliance range that pairs comfortably with most modern tonearms. Effective mass between 9 and 14 grams at the headshell is the sweet spot. Cartridge weight runs 9 grams across the aluminum-cantilever models (Opus4 through Sonata4) and steps up to 10 grams on the Master4 and Reference4, so headshell weight is the main variable to balance during arm matching.\u003c\/p\u003e\n\u003cp\u003eFor VTA, start parallel to the record surface and adjust by ear once break-in is past the first 20 to 30 hours. Cartridges in this category typically need that early use time before the suspension settles into its working stiffness.\u003c\/p\u003e\n\u003ch5\u003eThe Listening Room Difference\u003c\/h5\u003e\n\u003cp\u003eWe're a third-generation family business with a brick-and-mortar showroom in Chestertown, Maryland, and a reputation built on exceptional service and relentless passion for hifi. Whether you're visiting in person or ordering online, we bring decades of experience, personalized service, and honest guidance to every interaction. We don't just ship boxes. We help build systems, answer your questions like real humans, and make sure every detail of your setup is right, from the cables to the final connection. Our passion is helping you get the most out of your gear, with support that lasts well beyond the sale.\u003c\/p\u003e\n\n\u003ch5\u003eGrado Master4 Specifications\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eCartridge Type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eMoving Iron (Flux-Bridger)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eStylus\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eElliptical Diamond\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eCantilever\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eMachined Boron (5-Piece OTL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eOutput Voltage\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003e4.0mV (High Output) \/ 1.0mV (Low Output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eCoil Wire\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eOCC Copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eBody Material\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eAmerican Osage Wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eTracking Force\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003e1.6 - 1.9 grams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eCartridge Weight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003e10 grams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eCompliance\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003e20 µm\/mN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eStandard ½\" Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eConfigurations\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eHigh-Output Stereo, High-Output Mono, Low-Output Stereo, Low-Output Mono\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eOrigin\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eHand-built in Brooklyn, NY, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Grado","offers":[{"title":"High-Output Mono","offer_id":42681431523424,"sku":"GRADMASTER4HOMO","price":1000.0,"currency_code":"USD","in_stock":true},{"title":"Low-Output Stereo","offer_id":42681433456736,"sku":"GRADMASTER4LOST","price":1000.0,"currency_code":"USD","in_stock":true},{"title":"Low-Output Mono","offer_id":42681433489504,"sku":"GRADMASTER4LOMO","price":1000.0,"currency_code":"USD","in_stock":true},{"title":"High-Output Stereo","offer_id":42681433620576,"sku":"GRADMASTER4HOST","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/grado-master4-hero.jpg?v=1775507511"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/collections\/GoldringEthosSEMovingCoilCartridge-Sideviewofcartridge.jpg?v=1772829528","url":"https:\/\/listenroom.com\/collections\/best-phono-cartridges-1000-2000.oembed","provider":"The Listening Room","version":"1.0","type":"link"}